Abstract:Palygorskite clay supported Cp2TiCl2 catalyst system was developed and evaluated by ethylene slurry polymerization.The inorganic carrier was thermally activated at 500℃ to generate surface Lewis acidity,which was confirmed by pyridine adsorption experiment and subsequent FTIR spectra analysis.Two types of supported catalysts were prepared:immobilizing the metallocene catalyst directly on the carrier(Cat-A)and also on the carrier with methylaluminoxane(MAO)modification(Cat-B).Polymerization was carried out in toluene at 40℃ and 60℃ with the supported Cp2TiCl2 catalyst and homogeneous analogue.Cat-A gave higher catalyst activity compared with Cat-B,and was even more robust than corresponding homogeneous catalyst.This specifically high activity of Cat-A was attributed to the surface Lewis acidity of the thermally activated clay.Models of active surface species were discussed in comparison with silica supported metallocene catalyst.With the directly supported catalyst,molecular weights and melting points of the polymer products were lower than those of the polymer products obtained with Cat-B,and the polymer properties were much more affected by the polymerization temperature.By analyzing the SEM photographs of polymers at different polymerization stages,morphological replication of the single fiber of palygorskite was revealed and a final polyethylene “fiber cluster” structure was formed.This interesting evolution of polymer morphology was further discussed in relation to polyethylene/clay composite and the method of improving the final polymer morphology.

Preparation of nano-polyethylene fibres using TiCl4/MCM-41 catalytic system

Ethylene polymerization by diphenyl ether bridged dinuclear titanocenes/MAO

MCM-41 and SBA-15 supported Cp2ZrCl2 catalysts for the preparation of nano-polyethylene fibres via in situ ethylene extrusion polymerization

PREPARATION OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE USING STRUCTURED NANOPARTICAL ZIEGLER-NATTA CATALYSTS

Preparation of nano-polyethylene fibres using Cp2ZrCl2/carbon nanotube catalytic system

Preparation of Polypropylene/MMT Nanocomposites Using Complex Supported Catalysts

Preparation of Nano-polyethylene Fibers by SBA-15-supported Half-sandwich Titanium(Ⅳ) Aryloxy Catalyst

Ethylene polymerization with metallocene/late transition metal combined catalysts

Preparation Of Nano-Polyethylene Fibers By Sba-15-Supported Half-Sandwich Titanium(Iv) Aryloxy Catalyst

Ethylene Polymerization with Novel Phenoxy-Imine Catalysts Bearing 4-Vinylphenyl Group

TiCl4 Immobilized on a Composite Support SiO2/MgCl2·x(1,4‐butanediol)/poly[styrene‐co‐(acrylic Acid)] for Ethylene Polymerization: the Barrier Effect of Poly[styrene‐co‐(acrylic Acid)]

Characteristics of Palygorskite Supported Cp_2 TiCl_2 Catalysts for Ethylene Polymerization

A new route for preparing magnetic polyolefins with well dispersed nanometer magnetic particles in polymer matrix using supported Fe3O4/AlR3/TiCl4 nanometer magnetic Ziegler-Natta catalyst

Synthesis and characterization of titanium(IV) complexes bearing end functionalized biphenyl: Efficient catalysts for synthesizing high molecular weight polyethylene

Preparation of nano-polyethylene fibers and floccules using MCM-41-supported metallocene catalytic system under atmospheric pressure

Ethylene polymerization with iron-based diimine catalyst supported on MCM-41

Immobilization of a Zirconium Complex Bearing Bis(phenoxyketimine) Ligand on MCM-41 for Ethylene Polymerization

Combination of 8‐aminoquinoline Nickel Dichloride and Cp2ZrCl2 Catalysts for Ethylene Polymerization

Preparation of Nano-Polyethylene Fibers and Floccules by Extrusion Polymerization Under Atmospheric Pressure Using the SBA-15-Supported Cp2ZrCl2 Catalytic System

The preparation of nanosized polyethylene particles via carbon sphere nanotemplates

Synthesis of New Dendritic Titanium Catalysts and Catalytic Ethylene Polymerization