Abstract:In this paper, two types of acrylics, polyacrylate (PA), a copolymer of methyl methacrylate, acrylic acid, and others, and polyurethane-modified PA (PU/PA), are investigated in their interactions with inorganic phases in polymer-modified cement-based mixtures and in their mechanisms in improving both mechanical properties and durability of cement-based materials. In these investigations, the total organic carbon content (TOC) method is used to study the adsorption of polymer particles in mixtures. An aqueous tube test, x-ray diffraction (XRD), thermal gravity analysis (TGA), and Fourier transform infrared spectroscopy (FTIR) are employed to study the possible chemical reactions between the latexes and cement hydrates. Scanning electron microscopy (SEM) and energy-dispersive x-ray analysis (EDX) are used to observe the film formation and the final morphology of PA- and PU/PA-modified mortars. PU/PA latex is found to be relatively stable, and the behaviors of PU/PA-modified mixtures can be explained by Ohama's model. On the other hand, molecules of PA latex are very active in cement-based mixtures. Moreover, the normal assumption that polymer particles are uniformly dispersed in aqueous phase is invalid in PA-modified mixtures. Chemical reactions occur between PA latex and cement hydrates, especially calcium hydroxide. In the final comatrix of PA-modified mortar, no PA film with high purity can be distinguished by SEM/EDX. Based on the findings, a new model with a four-step procedure is proposed to explain the behaviors and properties of PA latex-modified cement-based materials. DOI: 10.1061/(ASCE)MT.1943-5533.0000302. (C) 2011 American Society of Civil Engineers.

Study of Surface Modification of Anhydrite Powder by Titanate Coupling Agent

Surface Modification of Halloysite/Sericite

The Study on Mechanism, Interfacial Properties of PS-b-PAA Copolymer Coated Calcium Carbonate Particulate

Interactions Between Organic and Inorganic Phases in PA- and PU/PA-Modified-Cement-Based Materials

The Mechanical and NIR Studies on Ultrafine Calcium Carbonate Treated by Four Surface Modifiers.

Effect of Surface Modification of Montmorillonite on the Properties of Rigid Polyurethane Foam Composites

Surface Modification of CaCO3 by Ultrasound-Assisted Titanate and Silane Coupling Agents

Structure and Mechanical Properties of PVC Composites Filled by Titanate Coupling Agents Modified Nano-CaCO_3

Modification Research of Nanometer TiO2 Coating and Its Effect on Properties of PVC

Synergistic surface modification of anhydrous calcium sulfate by polydopamine/oleylamine and its application in reinforced HDPE composites

The Progress on the Study of Hydrotalcite-Modified PVC

Synthesis of ACR/nanometer SiO2 Composite Particles and Their Tonghening Effect on PVC

Surface Modification Oftio(2)Particles With 12-Hydroxy Stearic Acid And The Effect Of Particle Size On The Mechanical And Thermal Properties Of Thermoplastic Polyurethane Urea Elastomers

Surface coating of anhydrite powders with CaCO3 nano-particles prepared in Ca(OH)2-H2O-CO2 system

Surface modification of talc powder by silane functionalized polycarboxylates and its effect on the performance of polyvinyl chloride composite

Surface Chemical Modification of Nanosized Oxide Particles with A Titanate Coupling Reagent in Isopropanol

Surface Modification of Colloidal Polymer Particles and Its Effect on Cement Hydration

Study on in-situ Modification of Vinyl Acetate-Acrylate Latex by Anatase TiO2 Sol

Study on surface modification of ground calcium carbonate with novel modifier and its PVC filling performance

Mechanism of surface hydrophobicity modification of wollastonite powder

Surface-modified by coupling agent and injection molding of zirconia powder