Abstract:To improve the mechanical properties of Nb-Si-Zr based superalloys at room temperature, the effect of a trace amount of Cr, C, Hf, Ta and Sc elements on the solidification processes, phase composition, mechanical properties and fracture behavior of Nb-Si-Zr based superalloys are studied by vacuum non-consumable arc-melting. The results show that the based alloy consists Nbss phase, γ-(Nb,X)5Si3 phase and Zr-rich γ-(Nb,X)5Si3 phase. However, there is no Zr-rich γ-(Nb,X)5Si3 phase in 20Zr-2C and 20Zr-4Hf alloys, indicating that a trace amount of C or Hf elements accelerates the diffusion of Zr element, and improves the segregation of the Nb-Si-Zr based alloys for the later stage of the superalloy solidification. The Nbss fraction in the matrix alloy (20Zr alloy) is 60%. C element increases the Nbss phase fraction by 4%, and Cr and Sc elements reduce the Nbss phase fraction by 4% and 6%, Hf and Ta elements reduce the Nbss phase by 1% and 2% compare with the matrix alloy (20Zr alloy). C element is dissolved in Nbss phase and γ-(Nb,X)5Si3 phase, while Cr element is more dissolved in Nbss phase and Sc element is more dissolved in Zr-rich γ-(Nb,X)5Si3 phase. The toughness of 20Zr-2 C alloy is the highest, and its K Q value reaches 14.05 MPa·m1/2, compared with the matrix alloy (20Zr alloy) increased by 23.46%. The enhancement of Nbss phase fraction and petal shaped microstructure make the crack propagation more difficult, thus increasing the K Q value of the 20Zr-2C alloy. The compressive properties of 20Zr-4Cr alloy are the best, and its compressive strength reaches 1807.3 MPa, compared with the matrix alloy (20Zr alloy) increased by 17.09%. The reason is that a trace amount of Cr element increases the fraction of γ-(Nb,X)5Si3 phase.

Preparation And Thermal Stability Of Zr-Al-Ni-Cu-Nb Bulk Amorphous Alloy Matrix Composites

Formation, Thermal Stability and Mechanical Properties of Zr-Nb-Cu-Ni-Al Bulk Metallic Glasses

Bulk Nanostructure Formation Directly From The Multicomponent Alloy Melt

Tuning Glass Formation and Mechanical Properties of ZrCoAl(Nb) Bulk Metallic Glass with Nb Microalloying Process

The Plasticity, Crystallization and Micro-Hardness of Zr–Co–Al-(Nb) BMGs Upon Rapid Quenching and Conventional Annealing

Microstructures and Mechanical Properties of Cast Nb-Ti-Si-Zr Alloys

Effect of Zr Element Addition on the Mechanical Behavior of Ti48.5-Xni49.5nb2 Alloy

Effect of microalloying additions on microstructural evolution and thermal stability in cast Al-Ni alloys

Thermal stability of the multicomponent nanocrystalline Ni–ZrNbMoTa alloy

Glass-Forming Ability and Thermal Properties of Al70Fe12.5V12.5X5(X = Zr, Nb, Ni) Amorphous Alloys via Minor Alloying Additions

Effects of adding niobium on microstructures and mechanical properties of ((Zr40Ti40Ni20)72Be28)100-Nb bulk metallic glasses

Mechanical properties and microstructure evolution of NbSiZr based alloy

Microstructures and mechanical properties of in-situ FeCrNiCu high entropy alloy matrix composites reinforced with NbC particles

Study on isothermal crystallization kinetics of Zr55.7Cu22.4Ni7.2Al14.7 bulk amorphous alloy

Multi-scale numerical simulation of the thermodynamic characteristics of Nb particles reinforced Zr-based amorphous composites by SLM

On the Microstructure and Properties of Nb-12Ti-18Si-6Ta-5Al-5Cr-2.5W-1Hf (at.%) Silicide-Based Alloys with Ge and Sn Additions

Effect of Aluminum, Iron and Chromium Alloying on the Structure and Mechanical Properties of (Ti-Ni)-(Cu-Zr) Crystalline/Amorphous Composite Materials

Effect of Nb content on mechanical reinforcement of the Cu-10Fe composites

Alloying Effect on the Microstructure and Property of Single Crystal Ni 3 Al Alloys

Formation of Ni–Nb–Zr–X (X = Ti, Ta, Fe, Cu, Co) Bulk Metallic Glasses

Effect of Nb-Content on Mechanical Properties of (Ni<sub>47</sub>Ti<sub>44</sub>)<sub>100-x</sub>Nb<sub>x</sub> Shape Memory Alloys