Abstract:Electric mobility has emerged as a paradigm shift towards cleaner, more efficient, and sustainable transportation systems. Laser lap welding is being adopted in battery manufacturing due to its unique advantages including high throughput, noncontact access, excellent precision, and small heat-affected zone. An important challenge of laser lap welding is the limited capability for in-process monitoring of penetration depth and contact width of weldment, which determines electrical resistance and joint strength. This requires three-dimensional live information of the molten pool/keyhole. The existing techniques are limited in surface imaging or indirect measurement of penetration depth, hence the precision is limited due to the intrinsic starving-signal in all dimensions. To address this issue, an optical system was designed to couple optical coherence tomography depth imaging with a coaxial high-speed camera to capture the three-dimensional information synchronously. A multimodal deep learning network was created to fuse the two-source data for predicting the depth and contact width. Experiments were conducted with different laser power and welding speeds, and the cross-sections of the weldment were cut and micro-imaged as the ground truth. Compared to the individual sensing systems, the proposed fused system exhibits improved precision on both the depth and contact width.

Coaxial real-time monitoring of gap defect in CO_2 laser welding process

Coaxial Monitoring of Penetration in CO2 Laser Welding

Coaxial monitoring and penetration control in CO2 laser welding (I) - Penetration status characteristics and coaxial monitoring

Quality Monitoring for CO2 Laser Cutting with Visual Sensing System (Ⅰ) Defect Detection with Coaxial Visual Sensing System

Penetration Monitoring and Control of CO 2 Laser Welding with Coaxial Visual Sensing System

Detection of weld dimension in open keyhole laser welding based on a CMOS coaxial visual sensing system

Quality Monitoring for CO_2 Laser Cutting with Visual Sensing System (Ⅲ) Coaxial Visual Detection of Surface Roughness for Laser Cutting

Gap-detecting Sensor and Wire Feed Control in Butt Laser Welding with Filler Wire

Real-time Defect Detection in Pulsed GTAW of Al Alloys Through On-Line Spectroscopy

In-process Monitoring of Penetration Depth and Contact Width During Laser Lap Welding Using Fused OCT Depth and Coaxial High Speed Image

Monitoring of deviation status of incident laser beam during CO 2 laser welding processes for I-core sandwich construction

Research on Gap Width Detecting Sensor and Wire Feeding System in Butt Laser Welding with Filler Wire

Online Welding Quality Monitoring Based on Feature Extraction of Arc Voltage Signal

Defect detection during laser welding using electrical signals and high-speed photography

Detection technique for transition between deep penetration mode and shallow penetration mode in CO2 laser welding of metals

Real-time monitoring of high-power disk laser welding statuses based on deep learning framework

Sensing and Control System of Process Quality in Co2 Laser Deep Penetration Welding

Development of the Plasma Detecting System in CO 2 Laser Welding

SAMPLING AND ANALYSIS OF CO2 WELDING ELECTRICAL SIGNALS

An Efficient Method for Laser Welding Depth Determination Using Optical Coherence Tomography

Characteristic Analysis on Laser Induced Plasma of Different Penetration Condition in High Power CO2 Laser Welding