Abstract:Abstract Online monitoring of the welding process is very important to the development of the modern manufacturing industry. However, monitoring welding defects in real-time and with high accuracy is challenging because welding is inherently a dynamic, non-linear process. In this paper, the forming defects generated during the melt Inert-gas welding of sheet steel as the object of research. We propose a multi-task simultaneous monitoring system for welding defects based on the YOLOv5 model, which can achieve highly accurate simultaneous detection of burn-through and weld deviation defects. Firstly, a passive vision system has been designed that can filter out strong arc light interference. In combination with a self-made camera bracket with flexible adjustment and repeatable positioning, clear images of the molten pool can be acquired. Compared to common methods that require a laser for weld deviation detection, all monitoring tasks can be performed with just one charge coupled device camera, significantly reducing the cost of deploying the system. Secondly, to obtain experimental data closer to the industrial field environment. We simulated different degrees of local and continuous burn-through by changing three parameters: welding current, plate thickness, and lap width. Four different deviations: left, right, and tilt were designed to obtain rich weld deviation image data. Finally, based on the above data, we compared several aspects such as detection speed, recognition accuracy, and loss function. The YOLOv5s model with the smallest model parameters was finally selected as the base model. The results show that our proposed multi-task simultaneous monitoring system achieves an average accuracy of 98.84% for the identification of four molten pool states. Burn-through defect and weld deviation detection with more than 50 frames per second can be achieved in the online detection state. This paper can provide some guidance for the online monitoring of the welding manufacturing process.

In-process Monitoring of Penetration Depth and Contact Width During Laser Lap Welding Using Fused OCT Depth and Coaxial High Speed Image

Optical coherence measurement-based penetration depth monitoring of stainless steel sheets in laser lap welding using long short-term memory network

Processing of Keyhole Depth Measurement Data during Laser Beam Micro Welding

An Efficient Method for Laser Welding Depth Determination Using Optical Coherence Tomography

Measurement of pulsed laser welding penetration based on keyhole dynamics and deep learning approach

Keyhole mapping to enable closed-loop weld penetration depth control for remote laser welding of aluminum components using optical coherence tomography

Penetration State Recognition during Laser Welding Process Control Based on Two-Stage Temporal Convolutional Networks

Novel approach for weld depth determination using optical coherence tomography measurement in laser deep penetration welding of aluminum and steel

Penetration Monitoring and Control of CO 2 Laser Welding with Coaxial Visual Sensing System

Progress and Perspectives of In-Situ Optical Monitoring in Laser Beam Welding: Sensing, Characterization and Modeling

Coaxial Monitoring of Penetration in CO2 Laser Welding

Potentials of Optical Coherence Tomography for Process Monitoring in Laser Welding of Hairpin Windings

Sensing and Control System of Process Quality in Co2 Laser Deep Penetration Welding

Penetration prediction of narrow-gap laser welding based on coaxial high dynamic range observation and machine learning

Intelligent Perception and Seam Tracking System for Thick Plate Weldments Based on Constant-Focus Optical Path

Online identification of burn-through and weld deviation in sheet lap MIG welding based on YOLOv5

Non-Destructive Identification of Weld-Boundary and Porosity Formation During Laser Transmission Welding by Using Optical Coherence Tomography

Analysis of Weld Formation in Multilayer Ultrasonic Metal Welding Using High-Speed Images

A penetration depth monitoring method for Al-Cu laser lap welding based on spectral signals

Coaxial monitoring and penetration control in CO2 laser welding (I) - Penetration status characteristics and coaxial monitoring

Online Path Recognition for Additive Manufacturing and Arc Welding with Filler Wire Based on Multi-vision Information Fusion