Abstract:In this study, HVOF spraying technology was utilized to prepare AlCoCrFeNi/WC composite coatings with varying WC content on 40CrMnMoA steel substrate. The microstructure, elemental distribution, phase structure and chemical valence states of wear scratches of the composite coatings were analyzed using the SEM, EDS, XRD and XPS. Microhardness was measured using single-point digital microhardness tester, while nanohardness and elastic modulus were determined using a nano-indenter. The bonding strength of the composite coatings was evaluated using a tensile tester. Friction and wear tests were conducted to assess the wear behavior of the composite coatings. The results indicated that the microstructure, microhardness, nanohardness and elastic modulus of AlCoCrFeNi HEA coating increased with the addition of WC, attributed to the hard phase effects of WC. However, the bonding strength first decreased and then increased. Compared to the W 0 coating, the wear rates of the other composite coatings decreased by 30.5 %, 46.1 %, 65.3 %, and 82.1 %, respectively, which demonstrating that the effect strengthening of WC. After the friction and wear tests, the wear mechanism of the W 0 and W 1 coatings represents adhesive wear, abrasive wear and severe oxidation wear. In contrast, the W 2 and W 3 coatings exhibited slight adhesive wear, slight abrasive wear and slight oxidation wear, while the W 4 coating showed the slightest abrasive wear, the slightest adhesive wear and the slightest oxidation wear.

Investigation of Microstructures and Corrosion Resistance of Two Types of AC-HVAF Sprayed WC Coatings

Microstructure and Corrosion Behaviour of WC-Co Coating Fabricated by Plasma Arc Welding

Investigation of microstructure and properties of AC-HVAF sprayed Ni60/WC composite coating

Effects Of Wc Crystal Characteristics On Microstructure And Mechanical Property Of Hvof-Sprayed Wc-Cocr Coatings

A Comparative Study on Wear and Corrosion Behaviour of HVOF- and HVAF-sprayed WC–10Co–4Cr Coatings

Investigation of microstructure and properties of AC-HVAF sprayed Ni-based coatings

Enhancing Comprehensive Properties of Hvof Thermally Sprayed Wc-10co Coatings Using Two Grain Inhibitors

Microstructure Characterization and Abrasive Wear Performance of Hvof Sprayed Wc-Co Coatings

Effect of Cobalt and Chromium Content on Microstructure and Properties of WC-Co-Cr Coatings Prepared by High-Velocity Oxy-Fuel Spraying

Corrosion Behavior and Mechanism of WC-12Co Coating in Salt Spray Environment

Corrosion Behavior of Hvof Sprayed Hard Face Coatings in Alkaline-Sulfide Solution

Characterization on microstructures and properties of WC-CoCr coating deposited by HVAF and HVOF processes

Analysis of Microstructure of WC-12Co Coatings Prepared by the Three Kinds of Supersonic Thermal Spraying Processes

Promising WC-30WB-10Co Cemented Carbide Coating with Improved Density and Hardness Deposited by High Velocity Oxy-Fuel Spraying: Microstructure and Mechanical Properties

Research on microstructure, mechanical property and wear mechanism of AlCoCrFeNi/WC composite coating fabricated by HVOF

Study on Microstructure and Thermal Fatigue of FeMnCrAl/WC Coatings

The Investigate of Microstructures and Properties of AC-HVAF Sprayed Iron-based Amorphous and Nano-crystalline Coatings

Influence of WC Content on Wear Resistance of Spraying-Welding Co/WC Coatings

Microstructure and Properties of FeMnCrAl/Ni Coated WC Coatings Deposited by High Velocity Arc Spraying

Effect of WC-17Co Content on Microstructure, Mechanical Properties and Wear Resistance of WC-17Co/Ni Composites Produced with Cold Spraying

Characterization of WC-CoCr Coating by HVAF