Abstract:In this study, HVOF spraying technology was utilized to prepare AlCoCrFeNi/WC composite coatings with varying WC content on 40CrMnMoA steel substrate. The microstructure, elemental distribution, phase structure and chemical valence states of wear scratches of the composite coatings were analyzed using the SEM, EDS, XRD and XPS. Microhardness was measured using single-point digital microhardness tester, while nanohardness and elastic modulus were determined using a nano-indenter. The bonding strength of the composite coatings was evaluated using a tensile tester. Friction and wear tests were conducted to assess the wear behavior of the composite coatings. The results indicated that the microstructure, microhardness, nanohardness and elastic modulus of AlCoCrFeNi HEA coating increased with the addition of WC, attributed to the hard phase effects of WC. However, the bonding strength first decreased and then increased. Compared to the W 0 coating, the wear rates of the other composite coatings decreased by 30.5 %, 46.1 %, 65.3 %, and 82.1 %, respectively, which demonstrating that the effect strengthening of WC. After the friction and wear tests, the wear mechanism of the W 0 and W 1 coatings represents adhesive wear, abrasive wear and severe oxidation wear. In contrast, the W 2 and W 3 coatings exhibited slight adhesive wear, slight abrasive wear and slight oxidation wear, while the W 4 coating showed the slightest abrasive wear, the slightest adhesive wear and the slightest oxidation wear.

Microstructure Characterization and Abrasive Wear Performance of Hvof Sprayed Wc-Co Coatings

Effects Of Wc Crystal Characteristics On Microstructure And Mechanical Property Of Hvof-Sprayed Wc-Cocr Coatings

Microstructure and Abrasive Wear Behaviour of HVOF Sprayed Carbide-Based Cermet Coatings

Effect of Flame Conditions on Abrasive Wear Performance of Hvof Sprayed Nanostructured Wc-12co Coatings

Microstructure and mechanical property of high velocity oxy-fuel sprayed WC-Cr3C2-Ni coatings

Characterization on microstructures and properties of WC-CoCr coating deposited by HVAF and HVOF processes

The Microstructure and Erosion Wear Performance of HVOF-Sprayed Cr3C2-NiCr Coatings with Different Feedstock Powder

A Comparative Study on Wear and Corrosion Behaviour of HVOF- and HVAF-sprayed WC–10Co–4Cr Coatings

Thermal sprayed WC-Co coatings and their mechanical properties

Microstructure and Tribological Properties of HVOF-Sprayed Nanostructured WC-12Co/Fe3O4 Coatings

Effects of Submicron WC Particles Addition on Wear Performances of HVOF Sprayed WC-Co Coatings

Effect of Cobalt and Chromium Content on Microstructure and Properties of WC-Co-Cr Coatings Prepared by High-Velocity Oxy-Fuel Spraying

Microstructure, Mechanical and Tribological Properties of WC-WCoB Coating

Study on Wear Resistance of WC-Co and NiCr-Cr_2C_3 Coatings Sprayed by HVOF

Research on microstructure, mechanical property and wear mechanism of AlCoCrFeNi/WC composite coating fabricated by HVOF

The Influence of HVAF Powder Feedstock Characteristics on the Sliding Wear Behaviour of WC–NiCr Coatings

Microstructure and Wear Performance of Arc Sprayed Fe-Feb-Wc Coatings

Influence of nano-sized WC addition on the microstructure, residual stress, and tribological properties of WC-Co HVAF-sprayed coatings

Investigation of Novel Nano-carbide WC/CoCr Coatings Applied by HVAF

Promising WC-30WB-10Co Cemented Carbide Coating with Improved Density and Hardness Deposited by High Velocity Oxy-Fuel Spraying: Microstructure and Mechanical Properties

Analysis of Microstructure of WC-12Co Coatings Prepared by the Three Kinds of Supersonic Thermal Spraying Processes