Abstract:Summary form only given. Sintered Co(Cr)-MoB materials have a good combination of high modulus, high wear resistance, high corrosion resistance and adequate fracture toughness, making them suitable for many industrial applications such as metal-cutting tools and wear resistant components. In many applications, they are superior to oxide and carbide coatings. Recently, boride- based cermet surface coatings have been used to enhance the corrosion and wear resistance of various engineering components such as sink rolls and supporting bearings on a continuous galvanizing line (CGL). Many thermal spraying techniques such as air plasma spraying (APS) and high velocity oxy fuel (HVOF) spraying can be used to deposit the boride-based coatings. However, the coating properties depend strongly on the spraying technique. Compared to other spraying techniques, HVOF spraying is one of the best methods to deposit conventional boride-based cermet powders due to the very high velocities thereby flattening the particles into a denser and more wear-resistant coating. In this work, the microstructures and mechanical properties of the deposited Co(Cr)-MoB cermet coatings are investigated via SEM, TEM, XRD, MIP (Mercury intrusion porosimetry), tensile test and Vickers microhardness. The results show that the as-sprayed cermet coating main consists of ternary transition metal borides phases such as CoMo2B2 and CoMoB. The microstructure of the coating keeps unchanged compared with the starting powders and no reaction and interdiffusion occurs at the coating/substrate interface during HVOF spraying. The surface connected porosity of the as-sprayed cermet coating shows a typical bimodal pore size distribution. The adhesive strength of the Co(Cr)-MoB cermet coating decreases with increasing thickness of the as-sprayed cermet coatings, which is attributed to the residual stress induced during thermal spraying. The distributions of the microhardness values of the coatings are conducted by Weibull statistical means and the results reveal a bimodal distribution of Vickers microhardness values. Such distribution can be attributed to the presence of melted and unmelted phases in the resultant coating produced from the microstructured powder feedstock. The anisotropy in the mechanical properties between the cross section and the top surface of the cermet coatings is examined.

Thermal sprayed WC-Co coatings and their mechanical properties

Effects Of Wc Crystal Characteristics On Microstructure And Mechanical Property Of Hvof-Sprayed Wc-Cocr Coatings

Microstructure Characterization and Abrasive Wear Performance of Hvof Sprayed Wc-Co Coatings

Relationships Between Feedstock Structure, Particle Parameter, Coating Deposition, Microstructure and Properties for Thermally Sprayed Conventional and Nanostructured WC–Co

Influence of WC Particle Size on the Mechanical Properties and Residual Stress of HVOF Thermally Sprayed WC–10Co–4Cr Coatings

Microstructure and Abrasive Wear Behaviour of HVOF Sprayed Carbide-Based Cermet Coatings

Characterization on microstructures and properties of WC-CoCr coating deposited by HVAF and HVOF processes

Microstructure and mechanical property of high velocity oxy-fuel sprayed WC-Cr3C2-Ni coatings

Characterization of Nano-Structured WC-Co Deposited by Cold Spraying

Mechanical Property and Wear Performance Dependence on Processing Condition for Cold-Sprayed WC-(nanoWC-Co)

Preparation and Characterization of WC/Co-W-C Cermet Coatings with Molten Zinc Corrosion Resistance by HVOF Spraying of Bimodal-Structured WC/Co Powder

Physical property effect of powder on thermal spraying coatings

Microstructure and mechanical property of high velocity oxy-fuel sprayed multimodal WC-Cr3C2–Co–Y2O3 cermet coating

Effect of Cobalt and Chromium Content on Microstructure and Properties of WC-Co-Cr Coatings Prepared by High-Velocity Oxy-Fuel Spraying

Promising WC-30WB-10Co Cemented Carbide Coating with Improved Density and Hardness Deposited by High Velocity Oxy-Fuel Spraying: Microstructure and Mechanical Properties

Analysis of Microstructure of WC-12Co Coatings Prepared by the Three Kinds of Supersonic Thermal Spraying Processes

Enhancing Comprehensive Properties of Hvof Thermally Sprayed Wc-10co Coatings Using Two Grain Inhibitors

Microstructure and Mechanical Characterization of HVOF Sprayed Boride-Based Cermet Coatings

Wear resistance enhancement of HVOF-sprayed WC-Co coating by complete densification of starting powder

Effect of Flame Conditions on Abrasive Wear Performance of Hvof Sprayed Nanostructured Wc-12co Coatings

Influence of HVO-AF Parameters and Particle Size on Elastic Modulus of WC-12Co Coatings