Abstract:Oxidation of aluminum powders is known to include several stages, corresponding to growth of different polymorphs of alumina. The initial oxide layer is amorphous, which transfers to γ-Al2O3 at elevated temperatures and greater oxide thicknesses. This work focuses on quantitative characterization of oxidation for thin initial oxide layers occurring at relatively low temperatures. The experiments include different types of thermo-gravimetric (TG) measurements with increased amounts of powder loaded for greater sensitivity. Modulated and isothermal TG measurements were found to be less useful than constant heating rate measurements. Results were processed using both, an explicit oxidation model and a model-free isoconversion method. The latter approach was more productive in identifying the activation energy of oxidation. Using the activation energy as a function of reaction progress, the pre-exponent was also determined as a function of reaction progress assuming a diffusion-limited reaction mechanism. The reaction kinetics was validated by comparison between predicted and measured oxidation rates for nanoaluminum powders reported in the literature. Finally, the oxidation model was combined with a heat transfer model to describe ignition of aluminum particles exposed to a heated oxidizing environment. A sharp increase in the ignition temperature from 850 to 2260 K is predicted as the particle size increases from 0.3 to 1.2 µm. The results are found to be sensitive to the assumed initial oxide thickness (2.5 nm); they are also somewhat affected by the value of thermal accommodation coefficient used in the heat transfer model.

High Temperature Oxidation Behavior of Iron-Based Metal Powder

Investigation of oxide scale formation and internal oxidation of an Fe-based coating at 500 °C and 600 °C

(Digital Presentation) Initial High-Temperature Oxidation Behavior of Iron Binary Alloys in Air

High-Temperature Oxidation Properties and Microstructural Evolution of Nanostructure Fe-Cr-Al ODS Alloys

Investigation of Selective Oxidation During Cooling of Hot-Rolled Iron-Manganese-silicon Alloys

Thermal enhancement of the oxidation layer of micron-sized aluminum powder and its anti-oxidation performance

High-Temperature Oxidation Behavior of Iron–Chromium–Aluminum Alloys

Oxidation behavior of gas-atomized AlCoCrFeNi high-entropy alloy powder at 900-1100 °C

OXIDATION BEHAVIOR OF FINE COPPER POWDER IN AIR BETWEEN 250-400 ℃

The Oxidation Mechanism of Pure Aluminum Powder Particles

High-Temperature Oxidation Behavior of Fe-1Cr-0.2Si Steel

Oxidation behavior of 316L austenitic stainless steel in high temperature air with long-term exposure

Thermal Oxidation Characteristics and Kinetics of Micron Aluminum Powder in Different Ambient Oxygen Concentration Atmospheres

The Influence of FeO on the Reaction between Fe–Al–Ca Alloy and Al2O3–CaO–FeO Oxide during Heat Treatment at 1473 K

Comparative Study On Oxidation Behavior Of Fe-5wt% Cr Alloy In Various Mixed Atmospheres At 900-1000 Degrees C

Molecular Dynamics Simulation of Fe-Based Metal Powder Oxidation during Laser Powder Bed Fusion

Initial stages of oxidation of aluminum powder in oxygen

Influence of Powder Oxidation on Powder Properties and Formability in H13 Hot-Work Steels Processed by Electron Beam Melting

High Temperature Oxidation Behavior of Al0.5CrCoFeNi High Entropy Alloy

Effect of Grain Size on Oxidation Behavior of Fe-40ni-15cr Alloys

Oxidation Behaviour of Feal Intermetallic Coatings Produced by Magnetron Sputter Deposition