Abstract:The Sn-based perovskite light-emitting diodes (PeLED) with the structure of (ITO)/MoO3/4,4′-cyclohexylidenebis[N,N-bis(p-tolyl)aniline](TAPC)/4,4′,4′-Tris(carbazol-9-yl)-triphenylamine (TCTA)/perovskite/1,3,5-Tri(m-pyrid-3-yl-phenyl)benzene (TmPyPB)/lithium fluoride(LiF)/Al were fabricated by thermal evaporation and in-situ annealing. The perovskite emitting layers were annealed at the various temperature of 50, 75 and 85 °C during the dual sources thermal evaporation of CsBr and SnBr2 instead of routine post-synthetic annealing for the formation of crystalline CsSnBr3 film. The effects of annealing temperature on the morphology, structure and photophysical properties of the CsSnBr3 perovskite films as well as the electroluminescence(EL) performance of the PeLED were investigated. Little temperature dependence of perovskite emitting layers' morphology was found while obviously intensified absorbance, crystallinity and steady-state photoluminesce(PL) as well as apparently increased PL decay lifetime and slight red-shifted PL spectra of the CsSnBr3 perovskite films upon increasing in-situ annealing temperature were demonstrated. The similar temperature dependent behavior of steady-state PL intensity, transient PL decay life time and photoluminescence quantum yield(PLQY) of all the CsSnBr3 films verified that the hybrid effect of suppressed deep acceptor states and enhanced emitting from shallow trap states would be responsible for the PL behavior of in-situ annealed CsSnBr3 films. In-situ annealing was also capable of extending carriers lifetime and reducing trap density, and leading to the occurrence of the suppressed "self-doping" of Sn4+ and reduction of acceptor states. Meanwhile, the improved crystal quality of the CsSnBr3 nanocrystals should be closely related to the enhanced charge carriers dynamics and improved PL performance. The PeLED with 85 °C in-situ annealed CsSnBr3 emitting layer demonstrated optimal EL performance with the current efficiency(CE) of 0.34 cd/A and external quantum efficiency(EQE) of 0.16%, which was consistent with the annealing temperature dependence of PL behavior of the CsSnBr3 perovskite emitting layer and could be attributed to its superior PL performance, low trap density and high crystallinity.

Improving the Performance of Organic Light-Emitting Diodes Containing BCP/LiF/Al by Thermal Annealing

Efficiency Enhancement of 1,1,2,3,4,5-Hexaphenylsilole-based Organic Light-Emitting Dioades by Post-Packaging Annealing

Simultaneous enhancement of the carrier mobility and luminous efficiency through thermal annealing a molecular glass material and device

Dark and illuminated J(V) characteristics of thin layered bulk heterojunction P3HT:PCBM sandwich solar cells after thermal treatment

Enhancement of Stability of Polymer Light-Emitting Diodes by Post Annealing

Inverted All-Polymer Solar Cells Based on a Quinoxaline–thiophene/naphthalene-Diimide Polymer Blend Improved by Annealing

Improved Performance of Alq(3)-based Organic Light-Emitting Diode with Multi-Layer Structure

Inverted annealing enhanced performance of organic thin-film transistors and phototransistors based on 2-(4-dodecylphenyl) [1]benzothieno[3,2-b]benzothiophene

Effects of Cathode Thickness and Thermal Treatment on the Design of Balanced Blue Light-Emitting Polymer Device

Improvement of Electron–hole Injection Balance in Si-anode Organic Light-Emitting Diodes by Using Enhanced Electron Injection Organic of Fluorinated Tris-(8-hydroxy-quinolinato) Aluminum

Effects of Post-Annealing on the Property of CsPbBr3 Films and the Performance of Relevant Light-Emitting Diodes

Considerable improvement in the stability of solution processed small molecule OLED by annealing

Effects of in-situ annealing on the electroluminescence performance of the Sn-based perovskite light-emitting diodes prepared by thermal evaporation

The effect of thermal annealing on defect states, light intensity and photocurrent of organic solar cells

Quantitative Nanoscale Monitoring the Effect of Annealing Process on the Morphology and Optical Properties of Poly(3-Hexylthiophene)/[6,6]-phenyl C61-butyric Acid Methyl Ester Thin Film Used in Photovoltaic Devices

Study of the effect of annealing process on the performance of P3HT/PCBM photovoltaic devices using scanning-probe microscopy

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

Light Emission Tuning of Organic Electroluminescence Material of Aluminum Tris-(8-hydroxyquinoline)(Alq_3)

Influence of thermal annealing on microstructure, energetic landscape and device performance of P3HT: PCBM-based organic solar cells

A Study on the Performances of White Organic Light-Emitting Diodes and the Morphologies of Their Hole-Blocking Layers

Annealing Of P3ht:Pcbm Blend Film-The Effect On Its Optical Properties