Abstract:In order to improve the mechanical properties of TiAl alloys, TiAl composites with different solidification paths were synthesized by metallurgical method. Results show the TiC disappears and Ti2AlC increases when the Al content is more than 42% (at.%, similarly hereinafter). Small TiC particles are located in Ti2AlC grains with irregular shapes when the Al content is 40%, and they translate into clubbed Ti2AlC with increasing of Al. This metallurgy method can solve the defects of the Al lacking and the residual TiC. The g phase increases between lamellar colonies with the increasing of Al. When the Al content is 48%, the fully lamellar structure transforms into a duplex microstructure and there are small Ti2AlC phases in g phases, because the forming of Ti2AlC phase must consume Al. The compressive strength increases up to 1678.68 MPa as Al content is 46 at.%, and then decrease to 1460.22 MPa, the compressive strain increases and then keeps stabilization with the increasing Al. The maximum strength improves 38.82% and the maximum strain improves 121.37%. The Ti2AlC/TiAl composites fracture behaviors are load transferring behavior, crack deflection, trans-lamellar cracking and extraction of carbide reinforcements. The Ti2AlC phase and the fully lamellar structure improve the mechanical properties. (C) 2017 Elsevier Ltd. All rights reserved.

Self-propagating High Temperature Synthesis of Intragranular TiC-Ti3AlC2composites

Microstructure and Compressive Properties Ofin SituSynthesized TiC/Ti Composites

Self-Propagating High-Temperature Synthesis, Microstructure and Mechanical Properties of Tic-Tib2-Cu Composites

Microstructure and compressive properties of in situ synthesized (TiB + TiC)/Ti composites

Formation mechanism of Ti3AlC2 in TiO2–Al–C/TiC systems at high temperatures

Preparation of Ti3AlC2 and Ti2AlC by self-propagating high-temperature synthesis and study on the reaction mechanism

Microstructural Characterization of TiC in in Situ Synthesized Titanium Matrix Composites

Synthesis of C F /tial 3 Composite by Infiltration-In Situ Reaction

Microstructure And Compressive Properties Of In Situ Synthesized (Tib Plus Tic)/Ti Composites

Effects of Forming Conditions and TiC–TiB 2 Contents on the Microstructures of Self-Propagating High-Temperature Synthesized NiAl–TiC–TiB 2 Composites

Self-propagating high temperature combustion synthesis of TiC/TiB2 ceramic–matrix composites

Formation of TiC/Ti 2 AlC and Α 2 +γ in In-Situ TiAl Composites with Different Solidification Paths

Combustion Synthesis and Thermal Stability of Ti3AlC2

Self-propagating high temperature combustion synthesis of TiB/Ti composites

PREPARATION OF Ti3AlC2 AND Ti2AlC BY SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS AND STUDY ON MECHANISM OF THE REACTION

Reaction mechanism and microstructure evolution of superhigh strength in-situ TiC/Ti composite based on Cr 2 AlC-Ti system

In-situ TiC/Ti composites based on Ti 2 AlC–Ti system: Reaction process, microstructure, and mechanical properties

Microstructure and property of Al/TiC composites prepared by reaction synthesis

In Situ Synthesis and Properties of Ti<sub>3</sub>AlC<sub>2</sub>/TiB<sub>2</sub> Composites

Preparation of Ti 3 AlC 2 and Ti 2 AlC by self-propagating high-temperature synthesis

Microstructural Characterization of Tib in in Situ Synthesized Titanium Matrix Composites Prepared by Common Casting Technique