Abstract:At present, the performance analysis of volumetric expanders by semi-empirical model is a very popular method. How to improve the universality without reducing the calculation accuracy is the key issue. For an atypical volumetric expander, the irreversibility analysis of the working process for single screw expanders is still lacking. In this paper, we explore the possibility of using a semi-empirical model considering geometric constraints to improve the universality. Firstly, a basic model of SSEs is proposed, in which the model parameters related to the structure are directly calculated by the geometry instead of being calculated by the optimization algorithm. So, the number of the model parameters is reduced to 5. And then, the model is solved by our previous experimental results. However, the deviation between the calculation results and the experimental data is significantly large. So, the sub-process assumptions and calculation formulas are adjusted, including mechanical loss, leakage loss and pressure resistance loss. Then, the modified model is solved and compared with the result of the basic model. From the calculation results, the deviation of the modified model is significantly lower than that of the basic model. Meanwhile, the calculation results are in good agreement with the experimental data. Moreover, due to considering the exhaust resistance loss, not only improves the calculation accuracy of the modified model, but also makes the physical meaning of the model clearer. The work of this paper indicates that adding geometric constraints and modifying sub-process assumptions at the same time is an effective method to improve the accuracy and universality of the semi-empirical model simultaneously.

A new model for depicting mass flow rate characteristic of electronic expansion valves

Transient MR fluid flows in valve mode using a non-convex constitutive relation

Comparing research on two different numerical models of electrostatically actuated valveless micropump

Mathematical model and experimental verification of high flow cartridge servo valve

A Comparative Study on Regulation Methods for Transcritical CO2 Ejector Expansion Refrigeration System.

Refrigerant Flow Through Electronic Expansion Valve: Experiment and Neural Network Modeling

Flow-induced Noise Mechanism and Optimization Design of Electronic Expansion Valve

Numerical and experimental investigation of cavitation characteristics of the electronic expansion valves

Experimental and numerical study on characteristics of super-linear mass flow rate and asymmetric cavitation in novel rotary-baffle curved-channel electronic expansion valve for refrigerator

Analytical Magnetic Field and Driving Force Models Based on Measured Boundary Conditions for Industrial Coriolis Mass Flowmeters

Modeling and Simulation Analysis of Speed-Regulating Valve Flow Fluctuations under Differential Pressure Steps

An Assessment of Friction Factor and Viscosity Correlations for Model Prediction of Refrigerant Flow in Capillary Tubes

Mass flow rate prediction of a direct-expansion ice thermal storage system using R134a based on dimensionless correlation and artificial neural network

Experimental Investigation into the Flow Coefficient of a Quick-open Ball Thermal Expansion Valve

Assessing the effects of fluids flow on heat transfer performance in direct contact heat transfer process through EMD-LSSVM model: An experimental study

Venturi Wet Gas Flow Modeling Based on Homogeneous and Separated Flow Theory

Semi-empirical modelling and analysis of single screw expanders considering inlet and exhaust pressure losses

Mathematical Modeling of an Armature Assembly in a Flapper–Nozzle Servo Valve Based on the Finite Element Method

A Mass-Conservative Average Flow Model Based on Finite Element Method for Complex Textured Surfaces

A mixture model with modified mass transfer expression for cavitating turbulent flow simulation

A Wet Gas Metering System Based on the Extended-Throat Venturi Tube