Abstract:The dynamic performance of a nozzle-flapper servo valve can be affected by several factors such as the disturbance of the input signal, the motion of the armature assembly and the oscillation of the jet force. As the part of vibrating at high frequency, the armature assembly plays a vital role during the operation of the servo valve. In order to accurately predict the transient response of the armature assembly during the vibration, a mathematical model of armature assembly is established based on the distributed parameters method (DPM) and Hamilton principle. The new mathematical model is composed of three main parts, the modal eigenfunction, modal mechanical response expressions of the spring tube and the motion equation of the other armature assembly. After programing, the purpose of using the DPM to predict the dynamic response of different positions located on the armature assembly is achieved. For verifying the validity of the mathematical model, the finite element method (FEM) and classic model (CM) of armature assembly are applicated by commercial software under the same condition. The comparison results prove that the DPM can effectively predict the axial and tangential deflection of the armature assembly different positions which the CM can't duing to its over-simplification. A certain error is generated when predicting the axial deformation at different heights by DPM, which is caused by an approximate method to simulate the torsion of the spring tube. The comparison results of the spring tube deflection at different vibration frequencies shows that the adaptability of DPM is significantly higher than the classic model, which verify the model is more adaptable for predicting the dynamic response of the armature assembly.

Mathematical Modeling of an Armature Assembly in a Flapper–Nozzle Servo Valve Based on the Finite Element Method

Mathematical modeling of an armature assembly in pilot stage of a hydraulic servo valve based on distributed parameters

Modeling of Armature-Flapper Assembly in a Hydraulic Servo Valve by Finite Element Analysis and Acoustic Excitation Measurements

Nonlinear Modeling on Electro Hydraulic Servo System and SSA Control

Modeling and Analysis of Hydraulic Controlled Rotary Valve Excitation System

Mathematical model and experimental verification of high flow cartridge servo valve

The Modeling and Experimental Verification of a Servo-Proportional Valve

Model And Optimal Design Of Pneumatic High-Speed On/Off Valve

Modeling of a pneumatic system for high-accuracy position control

The Modeling and Control of the Hydraulic Servo System by Using On-Off Valve

Modeling and Parameter Identification of the Vibration Characteristics of Armature Assembly in A Torque Motor of Hydraulic Servo Valves under Electromagnetic Excitations

A Seventh-Order Model for Dynamic Response of an Electro-Hydraulic Servo Valve

Distributed Parameters Modeling for the Dynamic Stiffness of a Spring Tube in Servo Valves

Dynamic Characteristics of the Jet Force on the Flapper of the Pilot Stage in a Flapper Nozzle Servo Valve under the Flow-Solid Interaction

Analysis of Vibrational Characteristics of Armature Assembly in a Hydraulic Torque Motor for Servo-Valve

Identification Algorithm and Improvement of Modal Damping Ratios for Armature Assembly in a Hydraulic Servo-Valve with Magnetic Fluid

Modeling and Parameter Sensitivity Analysis of Valve-controlled Helical Hydraulic Rotary Actuator System

Analysis for Effect of Spring Tube on Servo Hydraulic Systems

Dynamic Analysis of Flapper/Nozzle Electrohydraulic Servovalve Considering the Influence of the First-Stage Parameters

Finite Element Modeling and Optimal Design of an Electromagnetic Pneumatic Flow Servo Valve

Vibration Characteristics of Armature Assembly in a Torque Motor with Magnetic Fluids