Abstract:The dynamic performance of a nozzle-flapper servo valve can be affected by several factors such as the disturbance of the input signal, the motion of the armature assembly and the oscillation of the jet force. As the part of vibrating at high frequency, the armature assembly plays a vital role during the operation of the servo valve. In order to accurately predict the transient response of the armature assembly during the vibration, a mathematical model of armature assembly is established based on the distributed parameters method (DPM) and Hamilton principle. The new mathematical model is composed of three main parts, the modal eigenfunction, modal mechanical response expressions of the spring tube and the motion equation of the other armature assembly. After programing, the purpose of using the DPM to predict the dynamic response of different positions located on the armature assembly is achieved. For verifying the validity of the mathematical model, the finite element method (FEM) and classic model (CM) of armature assembly are applicated by commercial software under the same condition. The comparison results prove that the DPM can effectively predict the axial and tangential deflection of the armature assembly different positions which the CM can't duing to its over-simplification. A certain error is generated when predicting the axial deformation at different heights by DPM, which is caused by an approximate method to simulate the torsion of the spring tube. The comparison results of the spring tube deflection at different vibration frequencies shows that the adaptability of DPM is significantly higher than the classic model, which verify the model is more adaptable for predicting the dynamic response of the armature assembly.

Modelling and Simulation of Joint Actuated by Pneumatic Muscles

Modeling and Enhancement of Mckibben Pneumatic Muscle Actuators

Modeling and simulation of humanoid lower limb based on Pneumatic Artificial Muscle

Sliding Mode Tracking Control of Pneumatic Muscle Joint Actuated by High-speed On-off Solenoid Valve

Modeling of a servo platform driven by pneumatic artificial muscles

Tracking Control Simulation of Pneumatic Muscle Actuator Joint Using Saturated Adaptive Robust Controller

Modeling of a pneumatic system for high-accuracy position control

Adaptive robust posture control of a parallel manipulator driven by pneumatic muscles

Research on PMA Properties and Humanoid Lower Limb Application.

Model And Optimal Design Of Pneumatic High-Speed On/Off Valve

Modelling And High-Precision Constant Pressure Control Of The Pneumatic Suspension System

Modeling and Model Identification of Micro-position-control Hydraulic System

ADAPTIVE ROBUST POSTURE CONTROL OF A PNEUMATIC MUSCLES DRIVEN PARALLEL MANIPULATOR 1

Adaptive Robust Posture Control of A Pneumatic Muscles Driven Parallel Manipulator with Redundancy

Pressure Observer Based Adaptive Robust Trajectory Tracking Control of a Parallel Manipulator Driven by Pneumatic Muscles

Modeling Of A 6-Dof Parallel Manipulator Driven By Pneumatic Muscles

Design and Modelling of Multi-DOF Manipulator Driven by Hysteresis-Attenuated Pneumatic Artificial Muscles

Design And Modeling Of A Hydraulic Soft Actuator With Three Degrees Of Freedom

Mathematical modeling of an armature assembly in pilot stage of a hydraulic servo valve based on distributed parameters

Empirical modeling of dynamic behaviors of pneumatic artificial muscle actuators

Control of Soft Pneumatic Actuators with Approximated Dynamical Modeling