Abstract:Compared with the electric servoactuator, the macrofiber composite precompressed bimorph actuator (MFC-PBA) can be embedded into the airfoil to drive the deformation, thus saving the layout space and ensuring aerodynamic performance. However, the axial pressures of existing PBAs cannot be adjusted, which prevents MFC bimorph from achieving higher actuating performance under external load. Additionally, long-term high axial pressure causes permanent deformation and fracture of bimorph structure. Thus, an actuator using a twisted and coiled polymer actuator (TCPA) to regulate the axial pressure of MFC-PBA is proposed in this article, which can be referred to as the TM-PBA. First, a thermally driven tension gray-box model is established to obtain the tensile force of the TCPA under fixed boundary conditions at both ends. The thermally driven tension model is then combined with a finite-element model of the MFC bimorph to establish a complete mechanical model of the TM-PBA. Subsequently, the output tensile force of the TCPA and the actuation performance, frequency response, and hysteresis behavior of the TM-PBA were tested. The results show that the thermally driven tension gray-box model of the TCPA and the complete mechanical model of the TM-PBA can accurately predict the actuation capability of the TCPA and the TM-PBA; the output tensile force of the TCPA increased with increasing temperature and pre-elongation; and the actuation performance of the TM-PBA is 130% higher than that of the MFC-PBA. The control bandwidth of the TM-PBA is more than 10 Hz. Additionally, the TM-PBA hysteresis is related to load and driving frequency. Finally, the TM-PBA was applied to drive a rudder and its actuating capability was verified to be superior to MFC-PBA, but lower than that of the micro servoactuator. In future, the actuation capability can be increased by parallel multilayer TM-PBAs.

Modeling and Enhancement of Mckibben Pneumatic Muscle Actuators

Modelling and Simulation of Joint Actuated by Pneumatic Muscles

Research on PMA Properties and Humanoid Lower Limb Application.

The Design of High-speed Powerful Actuator Based on Giant Magnetostrictive Material and Analysis of Its Dynamic Modeling

Modeling of a pneumatic system for high-accuracy position control

Research Achievements and Development Trends of Pneumatic Artificial Muscles

Study and Prospect of Pneumatic Artificial Muscles

Model And Optimal Design Of Pneumatic High-Speed On/Off Valve

Modeling and simulation of humanoid lower limb based on Pneumatic Artificial Muscle

Kinematic and Quasi-Static Analysis Model of a Novel Variable Stiffness Pneumatic Artificial Muscle

Axial-Pressure-Adjustable Macro-Fiber Composite Bimorph Actuator Based on Twisted and Coiled Polymer Actuator

Design, Modeling and Simulation of an Innovation Pneumatic High Speed On-off Valve Based on Giant Magnetostrictive Material

Empirical modeling of dynamic behaviors of pneumatic artificial muscle actuators

Dynamic Control of Pneumatic Muscle Actuators

Modeling of Pneumatic Dual Reciprocating Bellows Pump with Flexible Linkage

Modeling Of A 6-Dof Parallel Manipulator Driven By Pneumatic Muscles

An improved generalized Prandtl–Ishlinskii model for the hysteresis modeling of pneumatic artificial muscles

Design and Characterization of Viscoelastic McKibben Actuators with Tunable Force-Velocity Curves

Parameter Identification and Model-Based Nonlinear Robust Control of Fluidic Soft Bending Actuators

Development and Control of Smart Pneumatic Mckibben Muscles for Soft Robots

Modeling Inverse Airflow Dynamics Toward Fast Movement Generation Using Pneumatic Artificial Muscle With Long Air Tubes