Abstract:This paper focuses on the design and modeling of a hydraulic soft actuator which can perform space motion with multiple degrees of freedom (DOF). The cylinder soft actuator made of elastomer has three fiber-reinforced hydraulic chambers distributed symmetrically. By controlling the pressure vector in the chambers, the motion of the soft actuator can be expressed by three independent variables including axial elongation, bending angle, and azimuth angle. This paper firstly presents the actuation principle, structural design, and fabrication method of the soft actuator. Secondly, the relationship between the input pressure and the axial length of the chamber is derived by taking the nonlinear deformation behavior of the elastomer into account, which is seldom considered in the state of the art. Thirdly, the kinematics of the soft actuator is modeled to predict the coordinates of its tip position with the piecewise constant-curvature (PCC) assumption. Finally, an experimental platform is set up and a series of experiments are implemented to identify some parameters which are difficult to be quantified analytically as well as to validate the developed model. The results show that the measured data are in good accordance with the predicted data. In addition, a model-based open-loop control experiment is carried out to realize the path following.

Design of a Bi-directional Lateral Thermal Actuator

Analysis and Experimentation of Novel Bi-Directional Photo-Thermal Micro-Actuators

A novel single-layer bi-directional out-of-plane electrothermal microactuator

Theoretical Modelling and Experimental Study of Novel Photothermal Microactuators

Thermal Actuation Analysis of Twisted and Coiled Polymer Actuators

Photothermal Microactuators Fabricated by LIGA Technology

Large Displacement Spring-Like Electro-Mechanical Thermal Actuators with Insulator Constraint Beams

A thermal actuator design for a safe and arming mems interrupter

Comparison of Microtweezers Based on Three Lateral Thermal Actuator Configurations

Design And Modeling Of A Hydraulic Soft Actuator With Three Degrees Of Freedom

Designs for improving the performance of an electro-thermal in-plane actuator

Development of All Metal Electrothermal Actuator and Its Applications

Theoretical Modeling of Microscopic Photothermal Expansion and Experimental Study of Photothermal Microactuators

A bi-directional thermal-driven actuator with conduction‐to‐insulation transformation behavior and its applications in overheating protection and early warning of fire

Improved Designs for an Electrothermal In-Plane Microactuator

Design, Fabrication, and Characterization of a Temperature-Sensitive Fluid-Driven Soft Actuator

Study of New Photothermal Microactuator Based on Micro/nano Scale Photothermal Expansion

A Single-Layer Step-Bridge for Out-Of-Plane Thermal Actuator

Design and Fabrication of a Metal-Silicon Actuator With Low Voltage, Low Power Consumption and Large Displacement

Development of Thermal Actuators with Multi-Locking Positions

Novel Bidirectional Linear Actuator for Electrohydraulic Valves