Abstract:The spectral characteristic of materials is the key factor of the photothermal microactuator's performance. The present article introduces the operating principle, and analyzes the relationship between the material spectral characteristic and its expansion. As the photothermal microactuator is an innovative microactuator based on photothermal expansion that absorbs the laser energy and converts it into internal energy to realize the microdrive, the optimal photothermal expansion material with proper absorption spectrum characteristic matching the spectrum of light driving source needs to be found. The reflection and absorption spectra of four types of polymeric material, including PVC, HDPE, LDPE and PET, were obtained by using the single integrating sphere method. The results indicate that the reflection spectrum of the dyed high-density polyethylene (HDPE) is of double-peak structure in visible band, and there is strong absorption within the range of 600-690 nm, which means it would match the light driving source quite well in the broad spectral range. Therefore, HDPE was chosen as the photothermal expansion material. In order to check out the feasibility and performance of the photothermal microactuactor based on HDPE, a prototyping microactuator 1 500 mm in length and 30 mm in thickness was manufactured by using an excimer laser micromachining system. With a laser diode (10 mW/650 nm) as the external power source to activate the microactuator, performance measurement experiments were carried out by using a self-produced video movement measurement system with a CCD-coupled microscope. The experiment results demonstrate that the deflection of the microactuator reaches 18.7 mm at 10 mW of laser power, showing that the characteristics of spectral absorption and light-heat transition are quite well at 650 nm. This novel photothermal microactuator has simple structure, adjustable displacement output, and more mobility, and can be controlled remotely, so it will be quite useful for applications in the fields of micro-optical-electro-mechanical systems (MOEMS).

A novel single-layer bi-directional out-of-plane electrothermal microactuator

A Novel Mumps-Compatible Single-Layer Out-Of-Plane Electrothermal Actuator

Analysis and Experimentation of Novel Bi-Directional Photo-Thermal Micro-Actuators

A Single-Layer Step-Bridge for Out-Of-Plane Thermal Actuator

Dynamic characteristics of micro-optothermal expansion and optothermal microactuators

Study of New Photothermal Microactuator Based on Micro/nano Scale Photothermal Expansion

Photothermal Microactuators Fabricated by LIGA Technology

Theoretical Modelling and Experimental Study of Novel Photothermal Microactuators

A novel microelectrostatic torsional actuator

Development of All Metal Electrothermal Actuator and Its Applications

Experimental Investigation of a Thermally Responsive Actuator Based on Metallic Molybdenum Disulfide: A Conceptual Analysis

Magneto-induced Self-Stratifying Liquid Metal-Elastomer Composites with High Thermal Conductivity for Soft Actuator

Micro-Structronics and Control of Hybrid Electrostrictive/Piezoelectric Thin Shells

Development of Photothermal Microactuator Based on Spectral Analysis of Photothermal Expansion Material

Monolithic Bi-directional Linear Microactuator for Light Beam Manipulation

Microheater actuators as a versatile platform for strain engineering in 2D materials

A thermal actuator design for a safe and arming mems interrupter

Novel Microfluid Actuator Based On Marangoni Effect

Design and Fabrication of a Metal-Silicon Actuator With Low Voltage, Low Power Consumption and Large Displacement

Dynamic Properties of a Metal Photo-Thermal Micro-Actuator

High-Performance, Low-Voltage, and Easy-Operable Bending Actuator Based on Aligned Carbon Nanotube/Polymer Composites