Abstract:We are among the first in China to study in situ synthesized composites of SiCp/(Mo, W)Si2. We now present our research results on in situ synthesized SiCp/(Mo, W)Si2 composites, which are expected to be highly promising for application in China. In the full paper, we explain in some detail our research results and their analysis. In this abstract. we just add some pertinent remarks to listing the two topics of explanation. The first topic is: the experimental methods. The three subtopics of the first topic are: the preparation of the test specimens (subtopic 1.1), the analysis of microstructure (subtopic 1.2) and the measurement of mechanical properties (subtopic 1.3). The second topic is: the results and discussion. The three subtopics of the second topic are: the microstructure and phases of in situ synthesized composites (subtopic 2.1), the mechanical properties at room temperature (subtopic 2.2) and the discussion and analysis (subtopic 2.3). In subtopic 2.1, we give three figures as results; the main result is that, in the SiCp/(Mo, W)Si2 composites, the reinforcement SiC is distributed around and in the grains of matrix MoSi2, and WSi2 is dissolved into the MoSi2. In subtopic 2.2, the measurement results are summarized in a table. In subtopic 2.3, additional items that we discuss and analyze are given in two figures and one table. Still in subtopic 2.3, we give the main results of our analysis as: (1) the co-strengthening of SiC and WSi2 makes the mechanical properties of the SiCp/(Mo, W)Si2 composites much better; (2) the flexural strength of 592 MPa, fracture toughness of 5.9 MPa(m1/2 and Vicker's hardness of 19.4 GPa were respectively measured for the composites, which are about 5, 2.1 and 2.2 times respectively higher than those of pure MoSi2 synthesized by the same process.

Microstructure and mechanical properties of in situ synthesized SiCp/(Mo, W)Si2 composites

Microstructure and mechanical properties of in situ SiC particulates reinforced MoSi2 matrix composite

Microstructural characterization of sintered MoSi2/SiCp composites

Microstructural Characterization of Sintered MoSi<sub>2</sub>/SiC<sub>P</sub> Composites

Fabrication and Mechanical Properties of SiCw/MoSi2–SiC Composites by Liquid Si Infiltration of Pyrolyzed Rice Husk Preforms with Mo Additions

Toughening of MoSi2-SiC composite synthesized in situ

In-situ Preparation of Nano MoSi 2 SiC Composite by Melt Infiltration of Silicon Method

The Microstructure and Mechanical Property of Mo(Si, Al)2-SiC Composite Prepared by Infiltrating Melt Aluminum

Phase composition and mechanical properties of in-situ synthetic Mo-Si compound composites

A novel porous carbon synthesized to serve in the preparation of highly dense and high-strength SiC/SiC by reactive melt infiltration

Microstructures and mechanical properties of in-situ SiC-TiB2 ceramic composites fabricated by reactive melt infiltration

3C-SiC Nanowires In-Situ Modified Carbon/Carbon Composites and Their Effect on Mechanical and Thermal Properties

Multifunction properties of SiOC reinforced with carbon fiber and in-situ SiC nanowires

Strengthening Behavior in SiC Nanowires Reinforced Pure Al Composite

Fabrication and Mechanical Properties of SiCw(p)/SiC-Si Composites by Liquid Si Infiltration using Pyrolysed Rice Husks and SiC Powders as Precursors

The study of pressureless-sintered Mo(Si,Al)(2)-SiC composite

High temperature creep behavior of in situ synthesized MoSi2-30%SiC composite

Mo-Si Compound Composites Synthesized by in Situ Reaction

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

In-situ synthesis of nano SiC particles in Al–Si–C system at 750 °C

Microstructure characterization and mechanical properties of in situ synthesized Ti2(Al,Si)C reinforced Al composites