Abstract:The connection between the steel joint and aluminum alloy pipe is the weak part of the aluminum alloy drill pipe. Practically, the interference connection between the aluminum alloy rod and the steel joint is usually realized by thermal assembly. In this paper, the relationship between the cooling water flow rate, initial heating temperature and the thermal deformation of the steel joint in interference thermal assembly was studied and predicted. Firstly, the temperature data of each measuring point of the steel joint were obtained by a thermal assembly experiment. Based on the theory of thermoelasticity, the analytical solution of the thermal deformation of the steel joint was studied. The temperature function was fitted by the least square method, and the calculated value of radial thermal deformation of the section was finally obtained. Based on the BP neural network algorithm, the thermal deformation of steel joint section was predicted. Besides, a prediction model was established, which was about the relationship between cooling water flow rate, initial heating temperature and interference. The magnitude of interference fit of steel joint was predicted. The magnitude of the interference fit of the steel joint was predicted. A polynomial model, exponential model and Gaussian model were adopted to predict the sectional deformation so as to compare and analyze the predictive performance of a BP neural network, among which the polynomial model was used to predict the magnitude of the interference fit. Through a comparative analysis of the fitting residual (RE) and sum of squares of the error (SSE), it can be known that a BP neural network has good prediction accuracy. The predicted results showed that the error of the prediction model increases with the increase of the heating temperature in the prediction model of the steel node interference and related factors. When the cooling water velocity hit 0.038 m/s, the prediction accuracy was the highest. The prediction error increases with the increase or decrease of the velocity. Especially when the velocity increases, the trend of error increasing became more obvious. The analysis shows that this method has better prediction accuracy.

Prediction of deformation microstructure of 2A70 aluminum alloy based on BP artificial neural network

A New Model of the Constitutive Relationship of 2A70 Aluminum Alloy

Grain size prediction of 6082 aluminum alloy after solution and aging treatment based on BP neural network

Prediction of Recrystallization Structure of 2A12 Aluminum Alloy Pipe Extrusion Process Based on BP Neural Network

Modeling the Constitutive Relationship of Al–0.62Mg–0.73Si Alloy Based on Artificial Neural Network

Modeling the Hot Deformation Behaviors of As-Extruded 7075 Aluminum Alloy by an Artificial Neural Network with Back-Propagation Algorithm

Prediction of the hot deformation behavior for Aermet100 steel using an artificial neural network

An ATPSO-BP Neural Network Modeling and Its Application in Mechanical Property Prediction

Prediction of the Hot Compressive Deformation Behavior for Superalloy Nimonic 80A by BP-ANN Model

A Comparative Study at the Flow Behavior Description of 2A14 Alloy Using BP-ANN and Strain Compensated Arrhenius Model

Investigation of Constitutive Model of As-Extruded Spray-Forming 7055 Aluminum Alloy Based on BP Artificial Neural Network

Prediction of Flow Stress of Annealed 7075 Al Alloy in Hot Deformation Using Strain-Compensated Arrhenius and Neural Network Models

Prediction of the Deformation of Aluminum Alloy Drill Pipes in Thermal Assembly Based on a BP Neural Network

Prediction on Hot Deformation Flow Stress of Medium-carbon Micro-alloyed Steels with Vanadium Based on Artificial Neural Network

Prediction of Mechanical Properties of A 357 Alloy Using Artificial Neural Network

Model for Predicting Microstructure of TA15 Titanium Alloy in Near Β Forging Based on Improved BP Neural Network

Prediction of hot deformation behavior in Ni-based alloy considering the effect of initial microstructure

Artificial neural network prediction to the hot compressive deformation behavior of Al–Cu–Mg–Ag heat-resistant aluminum alloy

A Characterization for the Constitutive Relationships of 42crmo High Strength Steel by Artificial Neural Network and Its Application in Isothermal Deformation

Dynamic Behavior and Modified Artificial Neural Network Model for Predicting Flow Stress During Hot Deformation of Alloy 925

Microstructural evolution and constitutive analysis of Al-Mg-Zn-Er-Zr based on arrhenius-type and machine-learning algorithm