Abstract:The data from thermal simulation plays a significant role in understanding the deformation behavior and deformation mechanisms of materials, and provides guidance for the design of hot deformation processes. In this paper, thermal simulation experiments were performed on an Al-6.3Zn-2.5Mg-2.6Cu-0.11Zr alloy, and the microstructure after hot deformation were characterized by Electron Backscatter Diffraction (EBSD) technique. The thermal simulation data and microstructural characteristics were analyzed and studied using machine learning technique: the Backpropagation Artificial Neural Network (BP-ANN) method, correlation analysis and K-means clustering analysis. A model for predicting not only flow stress but also dislocation density was established using the BP-ANN method, which exhibits good prediction accuracy. The R2 and AARE values are 90.19% and 6.87% for the prediction of dislocation density, and are 98.67% and 6.96% for the prediction of flow stress. Subsequently, correlation analysis was performed to investigate the relationship between energy dissipation efficiency η and deformation parameters as well as microstructural characteristics, revealing that energy dissipation rate is correlated positively with the content of dynamical recrystallization (DRX) and high angle grain boundary (coefficients of 0.90 and 0.82) and negatively with the dislocation density and the Zener-Hollomon parameter (coefficients of -0.98 and -0.97). Additionally, K-means clustering analysis was applied to study the relationship between the energy dissipation efficiency and softening mechanisms, it was found that the softening mechanisms changed with the variation of η value, dynamic recovery (DV), geometric DRX (GDRX) and continuous DRX (CDRX) dominated when η >0.38; DV, CDRX and discontinuous DRX(DDRX) dominated when 0.28< η <0.38; DV dominated when η <0.28. The results show that machine learning techniques are useful tools in mining thermal simulation data, and more information can be obtained than traditional data mining methods.

Prediction of Recrystallization Structure of 2A12 Aluminum Alloy Pipe Extrusion Process Based on BP Neural Network

Research and analysis of pipe extrusion process prediction model based on SAA-BPNN

The research on measuring analysis and prediction of the nanoscale precipitated phase in steel

Construction of aluminum alloy constitutive model based on BP neural network and the study of non-isothermal hydroforming

Modeling the Hot Deformation Behaviors of As-Extruded 7075 Aluminum Alloy by an Artificial Neural Network with Back-Propagation Algorithm

Investigation of Constitutive Model of As-Extruded Spray-Forming 7055 Aluminum Alloy Based on BP Artificial Neural Network

Prediction of Mechanical Properties and Optimization of Friction Stir Welded 2195 Aluminum Alloy Based on BP Neural Network

A Modified Back Propagation Artificial Neural Network Model Based on Genetic Algorithm to Predict the Flow Behavior of 5754 Aluminum Alloy

Artificial neural network approach for mechanical properties prediction of as-cast A380 aluminum alloy

A WOA-BP neural network microstructure evolution prediction model of TC11 titanium alloy and application in hollow shaft during cross wedge rolling with mandrel

Predicting the Low‐cycle Fatigue Life of Ti‐6Al‐4V Alloy Using Backpropagation Neural Network Optimized by the Improved Dung Beetle Algorithm

Modeling the Double-Pass Flow Curve of Nb Micro-Alloyed Steel by Machine Learning and Its Extrapolation to Static Softening Kinetics

Dynamic Behavior and Modified Artificial Neural Network Model for Predicting Flow Stress During Hot Deformation of Alloy 925

Deformation Intelligent Prediction of Titanium Alloy Plate Forming Based on BP Neural Network and Sparrow Search Algorithm

Numerical simulation method of aluminum alloy heat treatment process based on BP neural network

Study on hot deformation behavior and recrystallization mechanism of an Al-6.3Zn-2.5Mg-2.6Cu-0.11Zr alloy based on machine learning

Effects of annular channel angular extrusion process and heat treatment on microstructure and mechanical properties of 2A12 aluminum alloy cabin

Bending deformation prediction in a welded square thin-walled aluminum alloy tube structure using an artificial neural network

Application of artificial neural network in predicting grain size of solidification structure

Construction of Three-Dimensional Extrusion Limit Diagram for Magnesium Alloy Using Artificial Neural Network and Its Validation

Prediction of molten pool temperature and processing quality in laser metal deposition based on back propagation neural network algorithm