Abstract:In order to predict flow behavior and find the optimum hot working processing parameters for 5754 aluminum alloy, the experimental flow stress data obtained from the isothermal hot compression tests on a Gleeble-3500 thermo-simulation apparatus, with different strain rates (0.1⁻10 s⁻1) and temperatures (300⁻500 &deg;C), were used to construct the constitutive models of the strain-compensation Arrhenius (SA) and back propagation (BP) artificial neural network (ANN). In addition, an optimized BP⁻ANN model based on the genetic algorithm (GA) was established. Furthermore, the predictability of the three models was evaluated by the statistical indicators, including the correlation coefficient (R) and average absolute relative error (AARE). The results showed that the R of the SA model, BP⁻ANN model, and ANN⁻GA model were 0.9918, 0.9929, and 0.9999, respectively, while the AARE of these models was found to be 3.2499⁻5.6774%, 0.0567⁻5.4436% and 0.0232⁻1.0485%, respectively. The prediction error of the SA model was high at 400 &deg;C. It was more accurate to use the BP⁻ANN model to determine the flow behavior compared to the SA model. However, the BP⁻ANN model had more instability at 300 &deg;C and a true strain in the range of 0.4⁻0.6. When compared with the SA model and BP⁻ANN model, the ANN⁻GA model had a more efficient and more accurate prediction ability during the whole deformation process. Furthermore, the dynamic softening characteristic was analyzed by the flow curves. All curves showed that 5754 aluminum alloy showed the typical rheological characteristics. The flow stress rose rapidly with increasing strain until it reached a peak. After this, the flow stress remained constant, which demonstrates a steady flow softening phenomenon. Besides, the flow stress and the required variables to reach the steady state deformation increased with increasing strain rate and decreasing temperature.

Construction of Three-Dimensional Extrusion Limit Diagram for Magnesium Alloy Using Artificial Neural Network and Its Validation

Numerical and Experimental Investigation on Hot Backward Extrusion Process of Mg-Gd-Y-Zn-Zr Magnesium Alloy

Development and validation of an extrusion limit diagram for AZ31 magnesium alloy

Equal Channel Angular Deformation Process and Its Neuro-Simulation for Fine-Grained Magnesium Alloy

Development And Validation Of Extrusion Limit Diagram For Az31 And Am30 Magnesium Alloys

Prediction and parametric effect of electrical discharge layering of AZ31B magnesium alloy using response surface methodology-assisted artificial neural network

Modeling the Hot Deformation Behaviors of As-Extruded 7075 Aluminum Alloy by an Artificial Neural Network with Back-Propagation Algorithm

An Improved Neural Network Model for Prediction of Mechanical Properties of Magnesium Alloys

Predicting Tensile Properties of AZ31 Magnesium Alloys by Machine Learning

Prediction of Mechanical Properties of Rare-Earth Magnesium Alloys Based on Convolutional Neural Networks

Crack Propagation Analysis of Magnesium Rod Processed by Extrusion-shear: Numerical Modeling and Experimental Verification

Evaluation of Chilled Casting and Extrusion-Shear Forming Technology Based on Numerical Simulation and Experiments

Modeling of hot deformation behavior and prediction of flow stress in a magnesium alloy using constitutive equation and artificial neural network (ANN) model

Simulation of Extrusion Process of AZ31 Magnesium Alloy

A Modified Back Propagation Artificial Neural Network Model Based on Genetic Algorithm to Predict the Flow Behavior of 5754 Aluminum Alloy

A special extrusion-shear manufacturing method for magnesium alloy rods based on finite element numerical simulation and experimental verification

An ANN／GA(Artificial Neural Network／Genetic Algorithm)for Modeling and Optimizing of Liquid Metal Extrusion Process

Prediction Flow Behaviour of a Magnesium Alloy in Hot Deformation and a Comparative Study by Using Hyperbolic Sine Model and ANN Model

Revealing the Hot Deformation Behavior of AZ42 Mg Alloy by Using 3D Hot Processing Map Based on a Novel NGO-ANN Model

Microstructural evolution and constitutive analysis of Al-Mg-Zn-Er-Zr based on arrhenius-type and machine-learning algorithm

Three-Dimensional Numerical Simulation and Experimental Study of Severe Plastic Deformation of Az31 Magnesium Alloy