Abstract:The data from thermal simulation plays a significant role in understanding the deformation behavior and deformation mechanisms of materials, and provides guidance for the design of hot deformation processes. In this paper, thermal simulation experiments were performed on an Al-6.3Zn-2.5Mg-2.6Cu-0.11Zr alloy, and the microstructure after hot deformation were characterized by Electron Backscatter Diffraction (EBSD) technique. The thermal simulation data and microstructural characteristics were analyzed and studied using machine learning technique: the Backpropagation Artificial Neural Network (BP-ANN) method, correlation analysis and K-means clustering analysis. A model for predicting not only flow stress but also dislocation density was established using the BP-ANN method, which exhibits good prediction accuracy. The R2 and AARE values are 90.19% and 6.87% for the prediction of dislocation density, and are 98.67% and 6.96% for the prediction of flow stress. Subsequently, correlation analysis was performed to investigate the relationship between energy dissipation efficiency η and deformation parameters as well as microstructural characteristics, revealing that energy dissipation rate is correlated positively with the content of dynamical recrystallization (DRX) and high angle grain boundary (coefficients of 0.90 and 0.82) and negatively with the dislocation density and the Zener-Hollomon parameter (coefficients of -0.98 and -0.97). Additionally, K-means clustering analysis was applied to study the relationship between the energy dissipation efficiency and softening mechanisms, it was found that the softening mechanisms changed with the variation of η value, dynamic recovery (DV), geometric DRX (GDRX) and continuous DRX (CDRX) dominated when η >0.38; DV, CDRX and discontinuous DRX(DDRX) dominated when 0.28< η <0.38; DV dominated when η <0.28. The results show that machine learning techniques are useful tools in mining thermal simulation data, and more information can be obtained than traditional data mining methods.

Microstructural evolution and constitutive analysis of Al-Mg-Zn-Er-Zr based on arrhenius-type and machine-learning algorithm

Study on hot deformation behavior and recrystallization mechanism of an Al-6.3Zn-2.5Mg-2.6Cu-0.11Zr alloy based on machine learning

Evolution of Grain Structure and Dynamic Precipitation during Hot Deformation in a Medium-Strength Al-Zn-Mg-Er-Zr Aluminum Alloy

Hot Deformation Behaviors of AZ91 Magnesium Alloy: Constitutive Equation, Ann-Based Prediction, Processing Map and Microstructure Evolution

Artificial neural network prediction to the hot compressive deformation behavior of Al–Cu–Mg–Ag heat-resistant aluminum alloy

Hot Deformation Behavior and Microstructure Evolution of High-Strength Al-Zn-Mg-Cu Alloy

Effect of Zr and Er Addition on the Microstructural Evolution of a Novel Al−Mg−Zn−Er−Zr Alloy during Hot Compression

Enhancing constitutive description and workability characterization of Mg alloy during hot deformation using machine learning-based Arrhenius-type model

Research on constitutive model of aluminum alloy 7075 thermal deformation based on deep neural network

Prediction of mechanical properties of ZL702A based on neural network and regression analysis

Dynamic Behavior and Modified Artificial Neural Network Model for Predicting Flow Stress During Hot Deformation of Alloy 925

Constitutive behavior and novel characterization of hot deformation of Al-Zn-Mg-Cu aluminum alloy for lightweight traffic

Microstructure evolution, constitutive modeling and forming simulation of AA6063 aluminum alloy in hot deformation

Microstructure evolution mechanisms and a physically-based constitutive model for an Al–Zn–Mg–Cu–Zr aluminum alloy during hot deformation

Dislocation evolution and induced precipitation on corrosion resistance of a novel Al-Mg-Zn-Er-Zr alloy during hot compression

Modeling of the hot-deformation behavior of Fe-Ni-Al maraging steel using constitutive equations and machine learning algorithms

Neural network-based ductile fracture model for 5182-O aluminum alloy considering electroplastic effect in electrically-assisted processing

A Novel Neural Network-based Alloy Design Strategy: Gated Recurrent Unit Machine Learning Modeling Integrated with Orthogonal Experiment Design and Data Augmentation

Investigation of deformation behavior and strain-induced precipitations in Al-Zn-Mg-Cu alloys across a wide temperature range

Influence of pre-precipitation on the multi-stage hot deformation behavior of an Al-Cu-Mg-Zr alloy: Experiments and integrated modeling

Hot deformation behavior analysis of as-cast CoCrFeNi high entropy alloy using Arrhenius-type and artificial neural network models