Abstract:Nano-sized interphase precipitates, which form in ordered rows, are critical for high strength low alloy (HSLA) steels, in achieving the desired strength needed for downgauging for light-weighting automotive structures. The occurrence of interphase precipitation depends on many interrelated parameters, such as alloy chemical composition, temperature, processing parameters and crystallography. In this paper, we use data analysis based on machine learning algorithm: decision tree to predict whether interphase precipitation can occur. Due to the high strength of interphase precipitation and the minimum alloy content is one of the important goals pursued of iron and steel enterprises. Therefore, under the condition that interphase precipitation occurs, the chemical composition of the alloy can be reduced by using interphase precipitation. Guided by the physical metallurgy principle, this paper transforms the processing parameters into physical metallurgy parameters such as grain size, stored deformation energy, ferrite phase transformation temperature, and decision tree (DT) algorithm is used to model and verify whether interphase precipitation can occur. Under the condition of interphase precipitation, the support vector machine (SVM) models of interphase precipitation characteristic values were established. Based on the DT model and the SVM model, the particle swarm optimization (PSO) algorithm is used for the reduction design of the alloy, and the chemical composition can be reduced according to the target strengthening strength. The results of alloy reduction have been verified by experiments, which shows that the alloy can be reduced by using interphase precipitation.

The research on measuring analysis and prediction of the nanoscale precipitated phase in steel

Spatiotemporal Prediction and Characterization of Microstructure Evolution During In-Situ Heat Treatment Using a Deep Learning Algorithm

Study of Transformation Characteristics and Nano-Scale Precipitation in Nb Microalloyed Steel

Study on the Microstructure Prediction of Ultrafine Grain Steel in Thermal Simulation Experiment

COMPUTER SIMULATION FOR PRECIPITATION PROCESSO Ni_<75>Al_<2.5>V_<22.5> ALLOY WITH THE MICROSCOPIC PHASE-FIELD METHOD

Precipitation Kinetics and Mechanical Properties of Nanostructured Steels with Mo Additions

Machine Learning Interphase Precipitation Behavior of Ti Micro-alloyed Steel Guided by Physical Metallurgy Principle

A high-precision automatic recognition method based on target detection for nanometer scaled precipitates or carbides in different alloys

From Embryos To Precipitates: A Study Of Nucleation And Growth In A Multicomponent Ferritic Steel

Numerical Simulation on Recrystallization of Coarse-Grained Austenite in Low-Carbon Nb-microalloyed Steel

Artificial Neural Network Prediction for the Amount of TCP Phase of Re-containing Nickel Base Single Crystal Superalloys

The Effect of Size of Cu Precipitation on the Mechanical Properties of Microalloyed Steel

High-throughput Characterization Methods for Ni-based Superalloys and Phase Prediction Via Deep Learning

Study On Temperature Prediction Model Of Molten Steel In Lf Based On Pso Combined With Bp Neural Network

Modeling for Grain Size of Stainless Steel by Forging Recrystallization Based on BP Neural Network

Modeling of Strain-Induced Precipitation Kinetics and Evolution of Austenite Grains in Nb Microalloyed Steels

Application of artificial neural network in predicting grain size of solidification structure

Microstructure quantification of Cu–4.7Sn alloys prepared by two-phase zone continuous casting and a BP artificial neural network model for microstructure prediction

Modelling the precipitation of Nb(C,N) on dislocations in micro-alloyed steels

Research on the Prediction Model for Recovery Rate of Alloying Elements

Phase Prediction of High Carbon Pearlitic Steel: an Improved Model Combining Mind Evolutionary Algorithm and Neural Networks