Abstract:Chinese Fusion Engineering Test Reactor (CFETR) is a new test tokamak device being designed in China aimed to bridge gaps between ITER and DEMO. As one of the candidate tritium breeding blankets, a conceptual design scheme of the helium cooled solid breeder blanket has been proposed and a series of preliminary analyses have been carried out to access the performances. However, both the required global tritium breeding ratio for CFETR not less than 1.2 and its poor working conditions under intense radiation need further thorough neutronics analyses and optimizations during the design phase. In this work, first, three-dimensional neutronics model of CFETR was built, and the neutron wall loading and global TBR were obtained. The nuclear and thermal calculation results were automatically coupled, which could make the neutronics calculation results more accurate and guaranteed they could always satisfy the corresponding thermal limits during the whole process. Then, the tritium breeding and shielding performances of both the outboard and inboard equatorial blanket modules were optimized for the comprehensive optimal schemes. The influences of Be/W armors on the shielding performance and TBR were also investigated. Finally, the nuclear heating rates and the neutron flux densities in different components were calculated based on the obtained comprehensive optimal scheme. In this paper, the neutronics analyses and optimizations verified that the optimized conceptual design could well meet the tritium self-sufficiency and neutron shielding requirements, and this could provide a valuable reference for the further thermal-hydraulic analysis and structural optimization of the CFETR helium cooled solid breeder blanket.

A New Modular Design Concept for China's HCSB TBM in ITER

Preliminary Design for a China ITER Test Blanket Module

Neutronics design and optimization for ITER helium cooled ceramic breeder test blanket module

New Progress on Design and R&D for Solid Breeder Test Blanket Module in China

Current Progress of Chinese HCCB TBM Program

Optimal Design for Helium Cooled Solid Breeder Blanket of CFETR

Overview of Design and R&D of Solid Breeder TBM in China

Progress on design and R&D for helium-cooled ceramic breeder TBM in China

Progress on Design and R&D of CN Solid Breeder TBM FTP/3-5Ra

Current Design And R&D Progress Of The Chinese Helium Cooled Ceramic Breeder Test Blanket System

Updated design and development on key technology for CH HCCB TBM

Progress on Solid Breeder TBM at SWIP

Optimization Arrangement of Neutron Multiplier and Tritium Breeder for the Chinese ITER Solid TBM

Neutronics and Thermo-hydraulic Characteristic Studies of Supercritical Water Cooled Solid Breeder Test Blanket Module

Preliminary Neutronics/Thermal-Hydraulics Design and Analyses of the Helium-Cooled Mixed Bed Breeder Blanket for Cfetr under 1.5 Gw Fusion Power

The Neutron Calculation of the Chinese Helium Cooled Solid Breeder Test Blanket Module

Evaluation and Optimization of Tritium Breeding, Shielding and Nuclear Heating Performances of the Helium Cooled Solid Breeder Blanket for CFETR

Conceptual Design Of A Blanket Module Integrated With Divertor For Cfetr

Conceptual Design of a Helium-Cooled Ceramic Breeder Blanket for CFETR

Analysis and design of neutronics for an ITER test blanket module

Conceptual Design and Neutronics/Thermal-Hydraulic Coupling Optimization Analyses of Two Typical Helium Cooled Solid Breeder Blanket Modules for CFETR Phase II