Abstract:China Fusion Engineering Test Reactor (CFETR) is a superconducting tokamak proposed by national integration design group for magnetic confinement fusion reactor of China to bridge the R&D gaps between ITER and DEMO. Since the launch of CFETR conceptual design, a modular helium cooled lithium ceramic blanket concept had been under development by the blanket integration design team of the Institute of Plasma Physics of the Chinese Academy of Sciences, to complete CFETR in demonstrating its fusion energy production ability, tritium self-sufficiency and the remote maintenance strategy. To validate the feasibility, the neutronic analyses for CFETR with this modular helium cooled lithium ceramic blanket were performed. The 1-D neutronic study for CFETR was done in the first place to give a preliminary and quick demonstration of the overall neutronic performance. Meanwhile, the neutronic analyses for a single standard helium cooled lithium ceramic blanket module were done in several times to give more insight for the material and geometry parameters of intra-module structures. Therefore, the principles for neutronic design and the module level optimized parameters were produced, based on which the design of practical blanket modules planted in tokamak vacuum vessel was completed. In the end, the 3-D neutronic analysis for CFETR was done utilizing the MCNP code, in which the 11.25 degree sector model (consist of blanket modules, manifold, support plate, shield, divertor, vacuum vessel, thermal shield and TF coils) was generated with the McCad automated conversion tool from the reference CAD model for analysis, the bi-dimensional (radial and poloidal) neutron source map was plugged via general source definition card to stimulate the D-T fusion neutrons. The concerned neutronics parameters of CFETR, mainly including the tritium breeding ratio to characterize tritium self-sufficiency, the energy multiplication factor to characterize power generation, as well as, the inboard mid-plane radial profiles of neutron flux densities, helium production rate, displacement damage rate and the energy deposition to characterize the shielding performance, were produced. In principle, the neutronics performance of CFETR with modular helium cooled lithium ceramic blanket is promising. The tritium breeding capability meets the design target and, by referring to that for ITER and the EU DEMO fusion power plant, the inboard mid-plane shielding is effective to fulfill the radiation design requirement of the superconducting TF-coils, resulting in a compulsory warm-up time interval of ∼2 FPY for TF-coils. The nuclear heating loads to other CFETR components were generated. As an outcome of this work, the applicability of McCad on CFETR neutronic modeling is demonstrated.

New Progress on Design and R&D for Solid Breeder Test Blanket Module in China

Current Progress of Chinese HCCB TBM Program

Overview of Design and R&D of Solid Breeder TBM in China

Current Design And R&D Progress Of The Chinese Helium Cooled Ceramic Breeder Test Blanket System

Progress on design and R&D for helium-cooled ceramic breeder TBM in China

Preliminary Design for a China ITER Test Blanket Module

Progress on Design and R&D of CN Solid Breeder TBM FTP/3-5Ra

A New Modular Design Concept for China's HCSB TBM in ITER

Progress on Solid Breeder TBM at SWIP

Neutronics design and optimization for ITER helium cooled ceramic breeder test blanket module

Updated design and development on key technology for CH HCCB TBM

Conceptual Design of a Helium-Cooled Ceramic Breeder Blanket for CFETR

Evaluation and Optimization of Tritium Breeding, Shielding and Nuclear Heating Performances of the Helium Cooled Solid Breeder Blanket for CFETR

Optimal Design for Helium Cooled Solid Breeder Blanket of CFETR

A New Method for Improving the Tritium Breeding and Releasing Performance of China Fusion Engineering Test Reactor Phase II Helium‐cooled Ceramic Breeder Blanket

Progress in design and study of ITER test blanket modules

Optimization Arrangement of Neutron Multiplier and Tritium Breeder for the Chinese ITER Solid TBM

Neutronic Analyses for CFETR with Modular Helium Cooled Lithium Ceramic Blanket

Analysis and design of neutronics for an ITER test blanket module

Progress on Design and Related R&D Activities for the Water-Cooled Breeder Blanket for CFETR

Design of the Water-Cooled Ceramic Breeder Blanket for CFETR