Abstract:Surface modification of nanosized CaCO3 with zircoaluminate coupling agent and palmitic acid was carried out. The surface structure of prepared samples was characterized by XRD, FTIR, contact angle and rheological behavior determination. It was confirmed by XRD that the modified nanosized CaCO3 samples kept the same bulk structure as unmodified CaCO3. According to the spectra of FTIR, it was inferred that chemical binding and physical adsorption between surface modifiers and the nanosized CaCO3 had happened during the modification reaction. The surface free energies and polar components of the nanosized CaCO3 modified with zircoaluminate coupling agent and palmitic acid were calculated by measuring contact angles for water and benzene on the palletized surfaces. It was found that the surface energies and polar components of the nanosized CaCO3 modified with palmitic acid were lower than those of the nanosized CaCO3 modified with zircoaluminate coupling agent, and the contact angle for water on the surfaces of unmodified nanosized CaCO3, nanosized CaCO3 modified with zircoaluminate coupling agent and the nanosized CaCO3 modified with palmitic acid were 0°, 40° and 104°, respectively. It was confirmed that the nanosized CaCO3 modified with palmitic acid was of intense lipophilicity, while the nanosized CaCO3 modified with zircoaluminate coupling agent was of both hydrophilicity and lipophilicity. The rheological behavior of the suspensions composed of the unmodified and modified nanosized CaCO3 with paraffin was compared. The results showed that the apparent viscosity, dynamic elastic storage modulus and viscid loss modulus of the modified nanosized CaCO3 suspension were lower than those of the unmodified nanosized CaCO3 suspension, while the loss factor was higher.

Wet Surface Modification of Light Calcium Carbonate Powder by Aluminate Coupling Agent

Surface Energy Study Of Alooh Coated Calcium Carbonate By Inverse Gas Chromatography

Research on Surface Modification and Dispersibility of Al_2O_3 in Liquid Wear-Resisting Layer

The Mechanical and NIR Studies on Ultrafine Calcium Carbonate Treated by Four Surface Modifiers.

Surface Modification of CaCO3 by Ultrasound-Assisted Titanate and Silane Coupling Agents

Influence of Composite Modifier on the Modification of Calcium Carbonate Powder

Modification, surface structure and rheological behavior of nanosized CaCO3

EFFECT OF SURFACE MODIFICATION ON THE INTERFACIAL CHARACTERISTICS OF NANOMETER CALCIUM CARBONATE

Study on Surface Modification of CaCO3 Nano-particles Via Wet Route in Water Phase

Surface modification of nano-CaCO_3 via wet route in water phase

Surface Modification Of Calcium-Carbonate Used For Polypropylene Blending With Dimeric Aluminates

Surface Modification of Nanometer Calcium Carbonate and Its Dispersive Behavior in Water

Surface Modification of Nano-calcium Carbonate by Composite Modifier

Composite Modification and Characterization of Calcium Carbonate

Surface Modification and Adsorption Mechanism of Nanometer CaCO3

Surface Functional Modification of Nanosized α-Alumina and Its Characterisation

Mechano-activated Surface Modification of Calcium Carbonate in Wet Stirred Mill and Its Properties

Mechanism of surface hydrophobicity modification of wollastonite powder

Composite Modification Mechanism of Cationic Modifier to Amphoteric Modified Kaolin and Its Effects on Surface Characteristics

STUDY ON SURFACE MODIFICATION OF ACTIVATED MICRO CRYSTAL MUSCOVITE FILLER BY ALUMINATE COUPLING AGENT

Surface-Modification Of Alumina Bubble