Abstract:High-textured pyrolytic carbon (PyC) is the ideal interface for SiC fiber-reinforced SiC matrix (SiCf/SiC) composites. To prepare high-textured PyC coatings on SiC fibers efficiently, chemical vapor deposition (CVD) technique was applied with the single precursor ethanol. The effects of CVD parameters on the morphology and textures of PyC were investigated in detail. Rough laminar (RL), smooth laminar (SL) and regenerative laminar (ReL) PyC could be obtained by controlling the CVD parameters. High-textured RL PyC could be stably synthesized in a large distance range in the horizontal tube furnace at 1150 °C and 10–20 kPa (total pressure), which inferred that low temperature and negative pressure were beneficial to the formation of RL PyC. Conversely, when the temperature was up to 1350 °C, the textures of PyC at different deposition positions varied considerably. In the vicinity of isothermal zone, the texture evolution of PyC with deposition positions followed the pattern of SL→RL→SL, which could be ascribed to the ratio change of the small linear hydrocarbons (fillers) and the aromatic hydrocarbons (particles) in the gas phase. The texture evolution followed the Particle-Filler model. In addition to PyC textures, the PyC coating thickness played a critical role in regulating the mechanical properties of SiC fibers and SiCf/SiC composites. In the present work, the effects of thickness of RL PyC coatings on the tensile properties of SiC fibers were investigated. The SiC fibers with 0.3 μm RL PyC coating showed the highest average tensile strength (2735 MPa) and Weilbull modulus (10.34), which might be ascribed to the repair of fiber surface defects and the appropriate stress state between fibers and coatings. The results could provide essential data for the interface design and optimization of SiCf/SiC composites.

Influence of CVD Carbon Coating on SiC Fiber Property

Influence of SiC Coating Thickness on Mechanical Properties of SiCf/SiC Composite

Measurement and Evaluation of the Tensile Strength of CVD SiC Fibers with Carbon Coating

Effect of CVI SiC interphase on tensile properties of SiC fibers with different surfaces

Texture control of pyrolytic carbon coatings and effects of coating thickness on the tensile properties of SiC fibers

Effect of the Incorporation of SiC Nanowire with Double Protective Layers on SiC Coating for C/C Composites

Strength degradation of SiC fibers with a porous ZrB2-SiC coating: Role of the coating porous structure

Influence of SiC Coating on Antioxidation Property of Carbon Fibers

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Interfacial Reactions and Mechanical Properties Studies of C-Coated and C/B4C Duplex-Coated SiC Fiber-Reinforced Ti2AlNb Composites

Investigation on the properties of carbon fibre with C-Si functionally graded coating

Effects of PyC coating on SiC fibers after ultra-high temperature annealing

Damage Mechanism Analysis to the Carbon Fiber and Fiber-Ceramic Interface Tailoring of Cf/ZrC-SiC Using PyC Coating

Effects of Carbon Fiber Architecture on the Microstructure and Mechanical Property of C/C-SiC Composites

Oxidation-protective and Mechanical Properties of SiC Nanowire-Toughened Si–Mo–Cr Composite Coating for C/C Composites

Improved interfacial strength of SiO2 coated carbon fiber in cement matrix

Synthesis of Coatings on SiC Fibers and Their Effects on Microstructure and Mechanical Properties of SiCf/SiBCN Composites

Influence Of Sic Coating On The Oxidation Behavior Of Pan Carbon Fiber At Elevated Temperatures

Microstructure and mechanical properties of SiC fiber/Si-CoSi2 matrix composites fabricated by carbon chemical vapor infiltration and Si alloy melt infiltration process

Effect of the Incorporation of SiC Nanowire on Mullite/sic Protective Coating for Carbon/carbon Composites

Influence of SiC Nanowires on the Properties of SiC Coating for C/C Composites Between Room Temperature and 1500°C