Abstract:Iron manganese trioxide (Fe0.25Mn0.75)2O3 nanocrystals were synthesized by the sol-gel method. The 80 K Mossbauer spectrum was well-fitted using two doublets representing the 8b and 24d crystallographic sites of the (FexMn1-x)2O3 phase and two weak extra sextets which were attributed to crystalline and amorphous hematite. Our findings showed formation of a bixbyite primary phase. The Raman spectrum exhibits six Raman active modes, typical of (Fe,Mn)2O3, and two extra Raman modes associated with the secondary hematite phase. X-ray photoelectron spectroscopy analysis confirmed the presence of oxygen vacancy onto the (FexMn1-x)2O3 particle surface, with varying oxidation states. X-band magnetic resonance data revealed a single broad resonance line in the whole temperature range (3.8 K - 300 K). The temperature dependence of both resonance field and resonance linewidth shows a remarkable change in the range of 40 - 50 K, herein credited to surface spin glass behavior. The model picture used assumes (FexMn1-x)2O3 nanoparticles with a core-shell structure. Results indicate that below about 50 K the spin system of shell reveals a paramagnetic to spin glass-like transition upon cooling, with a critical temperature estimated at 43 K. In the higher temperature range, the superparamagnetic hematite (secondary) phase contributes remarkably to the temperature dependence of the resonance linewidth. Zero-field-cooled (ZFC) and fieldcooled (FC) data show strong irreversibility and a peak in the ZFC curve at 33 K, attributed to a paramagnetic-ferrimagnetic transition of the main phase. Hysteresis curve at 5 K shows a low coercive field of 4 kOe, with the magnetization not reaching saturation at 70 kOe, suggesting the occurrence of a ferrimagnetic core with a magnetic disorder at surface, characteristic of core-shell spin-glass-like behavior.

Nanocrystalline Oxides and Sulphides Prepared by Hydrothermal Processing and Mechanical Milling

Synthesis of Nanocrystalline Ferrites Zn0.4ni0.6cr0.5laxfe1.5-Xo4 and Its Magnetic Properties

Synthesis and Characterisation of Transition Metal Iron Oxide Nanocomposite Crystals and Particles Using Wet Chemical Coprecipitation Method

Synthesis and Characterization of Single Crystalline Mnooh and Mno2 Nanorods by Means of the Hydrothermal Process Assisted with Ctab

An Investigation of the Local Environments of Tin in Tin-Doped Α-Fe2o3

Hydrothermal synthesis and characterization of α-FeOOH and α-Fe2O3 uniform nanocrystallines

Studies on the nanocrystalline Co3O4 by wet synthesis and its microstructure

The Chemistry of Spinel Ferrite Nanoparticle Nucleation, Crystallization, and Growth

Characterization of Nanostructured Α-Fe2o3-sno2 Solid Solutions Prepared by High Energy Ball Milling

Synthesis of Fe-group Metal Oxide Nanostructures by Thermal Oxidation and Their Magnetic Properties.

Synthesis of SnFe2O4 Nanomaterials Via High Energy Ball Milling of SnO (Stannous) and α-Fe2O3 (Hematite) Solid Precursors

Α-Fe2o3 Nanocrystals: Controllable SSA-Assisted Hydrothermal Synthesis, Growth Mechanism, and Magnetic Properties

Microstructure and gas sensitive properties of α(M: Sn and Ti) materials prepared by ball milling

Selective Synthesis Of Alpha-Feooh And Alpha-Fe2o3 Nanorods Via A Temperature Controlled Process

Structural, morphological, and magnetic characterizations of (Fe0.25Mn0.75)2O3 nanocrystals: a comprehensive stoichiometric determination

Hydrothermal Preparation and Characterization of Nanocrystalline Porous Tin Dioxide Thin Films

Synthesis of Sn(1-X)Fex@Feysn(1-Y)Oz Nanohybrids Via A Simple Programmed Microfluidic Process

Transmission Electron Microscopy Studies of Mechanical Alloying in the Immiscible Fe2o3-Sno2 System

A new simple hydrothermal preparation of nanocrystalline magnetite Fe3O4

Magnetic properties and magnetism simulation of SmFe0.5Cr0.5O3 nanoparticles prepared by sol-gel method