Abstract:Mechanical behavior of film material in micron and nano scales has gained much consideration as it has been extensively used in microelectronics and Microelectromechanical Systems (MEMS). Many works have been carried out to investigate the mechanical properties of film material by undergoing uniaxial micro-tension testing where the micro-tension setups used by many authors are mainly the uniaxial tension in a unique direction. But when these setups are used under a microscopic system, the micro regions being detected often go beyond the scanning scope during the test. This brings in difficulty to accurately calculate the deformations of the detected regions. In this paper, a delicate setup which can accomplish uniaxial tension in the opposing directions and micro force detection is designed to investigate the in-situ microstructure evolution of specimens under loading. Two identical piezoelectric actuators moving in the opposing direction are used to exert forces on the specimen synchronously controlled by a computer. Two symmetrical double-cantilevered force sensors respectively connected to the two PZT actuators are devised to detect the tensile loads applied on the specimen. The force sensors are calibrated using Electronic Speckle Pattern Interferometry (ESPI). The relative gripping and adjusting units located between the double-cantilevered force sensors are employed to ensure that the specimen is under uniaxial load. The proposed tensile setup can be used under an optical microscopic or an AFM stage for studying the morphology changes and deformations of material on grain scale. The elaboration of the system is presented in the paper and an experiment of polycrystalline aluminum thin film deformations based on grain scale is performed to demonstrate its performance.

Methods of Piezo-Spectroscopic Calibration of Thin-Film Materials: I. Ball-On-Ring Biaxial Flexure

Ultra-sensitive, Highly Reproducible Film Stress Characterization Using Flexible Suspended Thin Silicon Plates and Local Curvature Measurements

A new method for high resolution curvature measurement applied to stress monitoring in thin films

Microscopic observation of strain induced in heteroepitaxial layers with reflection type of infrared polariscope

Two-dimensional stress measurement of a micromachined piezoresistive structure with micro-Raman spectroscopy

Residual Stress Inspection by Eu3+ Photoluminescence Piezo-Spectroscopy: an Application in Thermal Barrier Coatings

Surface Effects On The Wrinkling Of Piezoelectric Films On Compliant Substrates

Calibration Of Non-Linearity Of Piezo Elements And Image Distortion In Atomic Force Microscope

Design of Piezoresistive Micro-Cantilever with Stress Concentration Regions

New Methods for Measuring Mechanical Properties of Thin Films in Micromachining: Beam Pull-in Voltage (VPI) Method and Long Beam Deflection (LBD) Method

Calibration technique for MEMS membrane type strain sensors

A Uniaxial Tension System and Its Applications in Testing of Thin Films and Small Components.

Piezoelectric Coefficient Measurement of Piezoelectric Thin Films: an Overview

In Situ and Real-Time Tensile Testing of Thin Films Using Double-Field-of-view Electronic Speckle Pattern Interferometry

Microscopic Stress Analysis In A Luminescent Glass

Rigid platform for applying large tunable strains to mechanically delicate samples

OS5-2-3 an In-Situ Micro-Tension Setup and Its Application

Piezoelectric-based apparatus for strain tuning

Critical role of the sample preparation in experiments using piezoelectric actuators inducing uniaxial or biaxial strains

Calibration for determination of compressive stress in glass‐to‐metal seals via photoluminescence spectroscopy

Real-Time and Full-Field Deflection Measurement of Thin Films Electroplated on the Single Crystal Silicon Wafers