Abstract:Piezoresponse Force Microscopy (PFM) and Electrochemical Strain Microscopy (ESM) are two related techniques that have had considerable success in nano-scale probing of functional material properties. Both measure the strain of the sample in response to a localized electric field beneath a sharp conductive tip. In this work, a collection of commercially available glass samples were measured with a variety of Si cantilevers coated with different conductive metals. In some cases, these glasses showed significant hysteresis loops, similar in appearance to those measured on ferroelectric materials with spontaneous permanent electric dipoles. The magnitude of the electrochemical strain and hysteresis correlated well with the molar percentage of sodium in the glass material, with high sodium (soda-lime) glass showing large hysteresis and fused silica (pure SiO2) showing essentially no hysteresis. The elephant-ear shape of the hysteresis loops correlated well with it originating from relaxation behavior, an interpretation verified by observing the temperature dependent relaxation of the ESM response. Cation mobility in a disordered glass should have a low diffusion constant. To evaluate this diffusion constant, the temperature of the glass was varied between room temperature and 200C. Vanishing hysteresis as the temperature increased was associated with a decrease in the relaxation time of the electrochemical response. The hysteretic behavior changed drastically in this temperature range, consistent with bound surface water playing a large role in the relaxation. This demonstrates the ability of ESM to differentiate cationic concentrations in a range of silica glasses. In addition, since glass is a common sample substrate for, this provides some clear guidance for avoiding unwanted substrate crosstalk effects in piezoresponse and electrochemical strain response measurements.

Microscopic Stress Analysis In A Luminescent Glass

Photoluminescence Spectroscopy to Detect Microregion Stress Distribution in Glass‐to‐metal Seals

Physically-based Interpretation of Abnormal Stress Relaxation Response in Glassy Polymers

Determination of Compressive Stress in Glass-to-metal Seals Using Photoluminescence Spectroscopy Technique

A novel method for stress evaluation in chemically strengthened glass based on micro-Raman spectroscopy

Residual Stress Inspection by Eu3+ Photoluminescence Piezo-Spectroscopy: an Application in Thermal Barrier Coatings

Calibration for determination of compressive stress in glass‐to‐metal seals via photoluminescence spectroscopy

Stress perturbation method for the assessment of cathodoluminescence probe response functions

Energy-dependent correlation between micro/nano-morphology and stress state of femtosecond laser-induced modification in fused silica

Mechano-luminescence Behavior of Lanthanide-Doped Fluoride Nanocrystals for Three-Dimensional Stress Imaging

Microstrain‐Stimulated Elastico‐Mechanoluminescence with Dual‐Mode Stress Sensing

Dynamic Visualization of Stress/Strain Distribution and Fatigue Crack Propagation by an Organic Mechanoresponsive AIE Luminogen

A novel method to characterize the residual stress on the fused silica surface based on the evolution of the atomic point defects

Intermittent in-situ high-resolution X-ray microscopy of 400-nm porous glass under uniaxial compression: study of pore changes and crack formation

Delayed stress memory by CaAl2O4:Eu2+ mechanoluminescent phosphor with defect engineering regulation

Stress-induced color manipulation of mechanoluminescent elastomer for visualized mechanics sensing

Self‐Reporting Multiple Microscopic Stresses Through Tunable Microcapsule Arrays

Stress-enhanced ion diffusion at the vicinity of a crack tip as evidenced by atomic force microscopy in silicate glasses

Electrochemical Strain Microscopy of Silica Glasses

Fabrication of a Fluorophore-Doped Cylindrical Waveguide Structure Using Elastomers for Visual Detection of Stress

Edge and boundary stress measurement in glass