Abstract:Mn-doped (Na0.85K0.15)(0.5)Bi0.5TiO3 (NKBT-Mn) thin films were fabricated on Pt(111)/Ti/SiO2/Si substrates via an aqueous sol-gel method and annealed at different temperatures from 550 degrees to 800 degrees C. Two different crystallization processes, i.e., single crystallization and multiple crystallizations, were used. The structures of the films were analyzed using X-ray diffraction, which shows that the NKBT-Mn thin film prepared by multiple crystallizations crystallize into the pure perovskite phase, while pyrochlore phase formed in the film prepared by the single crystallization. Ferroelectric and dielectric properties of NKBT-Mn thin films are quite dependent on the anneal temperature. The P-r value was a maximum for the 700oC-annealed thin film and decreased with both decreasing and increasing anneal temperature. The NKBT-Mn thin film annealed at 700 degrees C had the largest epsilon(r) of 426 and the lowest tan delta of 0.061. At the same time, the temperature-dependent ferroelectric property was also investigated from room temperature to -150 degrees C. It is found that P-r of the film sample increases as temperature decreases, which can be well explained by a temperature-dependent charged carriers-domain wall interaction. Current density measurement indicates that the change in morphology with increasing anneal temperature and the volatility of Bi and Na/K at high temperature may responsible for the change in leakage current density and the NKBT-Mn thin film annealed at 700 degrees C has the lowest leakage current of 7.6 x 10-5 A/cm2.

Switching Properties of Bi3.15Nd0.85Ti3O12 Thin Films Prepared by Metalorganic Deposition Method

Influence of Annealing Temperature on Microstructure and Phase Transformations of Oxide System Bi2O3/TiO2 Formed in Aqueous Solutions

Switching Kinetics of Neodymium-Modified Bi4ti3o12 Thin Films

Switching Properties of SrBi2Ta2O9 Thin Films Produced by Metalorganic Decomposition

Effect of Anneal Conditions on Electrical Properties of Mn-Doped (na0.85k0.15)(0.5)bi0.5tio3 Thin Films Prepared by Sol-Gel Method

Impact of annealing atmosphere on the multiferroic and dielectric properties of BiFeO<sub>3</sub>/Bi<sub>3.25</sub>La<sub>0.75</sub>Ti<sub>3</sub>O<sub>12</sub> thin films

Structure evolution of the interfacial layer of BaTiO3 thin films during annealing process and related good resistive switching behaviors

Thermal and Piezoelectric Properties of Bi3.15Nd0.85Ti3O12 Thin Film Prepared by Metal Organic Decomposition

Impact of annealing atmosphere on the multiferroic and dielectric properties of BiFeO 3 /Bi 3.25 La 0.75 Ti 3 O 12 thin films

Characterization Of Srbi2ta2o9 Films Prepared By Metalorganic Decomposition Using Rapid Thermal Annealing

Effect of annealing temperature on the properties of 0.5Bi4Ti3O12-0.5BiFe0.98Mn0.02O3 thin films

The Effect of Deposition Temperature and Postannealing on the Dielectric Properties of Ba_(0.5)Sr_(0.5)TiO_3 Thin Films

Effects of thermal anneal temperature on electrical properties and energy-storage density of Bi(Ni 1/2 Ti 1/2 )O 3 –PbTiO 3 thin films

Effect of Annealing Temperature on Properties of Barium Zirconium Titanate Thin Films Deposited by Sol-Gel Method

Insulating properties of rapid thermally processed Bi2Ti2O7 thin films by a chemical solution decomposition technique

Polarization Switching Of Srbi2ta2o9 Thin Films Prepared By Mod Method

Microstructure and Ferroelectric Properties of Bi3titao9 Thin Films by Metalorganic Decomposition Method

Structural and Electrical Properties of Bi3.25la0.75ti3o12 and Bi3.25pr0.75ti3o12 Thin Films for Memory Applications

Temperature-dependent Effect of Oxygen Vacancy on Polarization Switching of Ferroelectric Bi3.25La0.75Ti3O12 Thin Films

Structural, Ferroelectric, Dielectric Properties and Leakage Characteristics of Neodymium-Doped Bi 4 Ti 3 O 12 Thin Films Prepared by Metalorganic Deposition Method

Temperature dependence of optical and structural properties of ferroelectric B 3.15 Nd 0.85 Ti 3 O 12 thin film derived by sol–gel process