Abstract:Micro-electromechanical systems (MEMS) relays should have high current-carrying capability and high device reliability for high-power applications. The current-carrying capability of MEMS relays is mainly limited by the thickness of metal contacts fabricated by micromachining process. Another significant limiting factor is the high contact resistance resulted from the low driving force, which is provided by microactuators. This paper presents a matrix configuration of electrostatically actuated microcantilever relay arrays that are connected in parallel to shunt high currents to individual relay elements. This method allows the matrix to be configured for different power requirements. The proposed novel hollow suspended spring lowers the driving voltage and enhances the device stability considerably because of its low longitudinal stiffness while high lateral stiffness. The average of pull-in voltages is approximately 39.4 V and the overdamped switching-on time is approximately 180 μs when 42 V of driving voltage is applied. Contact resistance of each relay is less than 1 Ω, and the equivalent contact resistance of the 2 × 2 relay arrays is lower than 250 mΩ. Each relay can operate in over 6.5 × 10 3 hot-switching cycles without failing at a current of 20 mA with 0.3 μm thick Au contacts, thus the 2 × 2 relay arrays can carry four times currents more than one single relay. Therefore, the proposed MEMS relay arrays are suitable for applications in high-power switching systems that require high reliability and stability, such as space applications.

A fast and low power consuming double stability MEMS microrelay

Study Of A Micro Electromagnetic Relay Based On Mems

A Low Power PLL Circuit with Area-Saving Loop Filter Applied in MEMS

High-power mems relay array with improved reliability and consistency

A Low-Voltage Lateral MEMS Switch with High RF Performance

An One-Drive-four Wireless High Voltage High Speed Controller System Used in 100°/8 Ms MEMS Rotary Actuator for Antenna Array

Design and Fabrication of a Novel MEMS Relay with Low Actuation Voltage.

Electrostatically actuated MEMS relay arrays for high-power applications

Low Voltage, High Speed and Small Area In-Plane MEMS Switch

An Review of MEMS-based Microrelay Evolution and Its Key Issues

Magnetic Energy Coupling System Based on Micro-Electro-Mechanical System Coils

Research on the Application of Microcast Electromagnetic Coil in an Si MEMS Bistable Recoverable Safety and Arming Device

Typical Structures and Developing Trends of MEMS Relays

Design, Optimization, and Scaling of MEM Relays for Ultra-Low-Power Digital Logic

A Zero Static Power Consumption Bi-Stable RF MEMS Switch Based on Inertial Generated Timing Sequence Method

Micro Electromagnetic Actuator with High Energy Density Based on MEMS Technology

Highly-Linear Magnet-Free Microelectromechanical Circulators

Experiment and simulation study of instability of a novel electrostatic MEMS relay

An Approach to Near Zero Power Bi-Stable Driving With a Simple Pulse Signal for RF MEMS Switch

Electrostatic Comb-Drive Actuator for Mems Relays/Switches with Double-Tilt Comb Fingers and Tilted Parallelogram Beams

A Microactuator For Magnetic Field Control Device With Large Shifting Range