Abstract:Catalytic decomposition of benzene was studied by using oxides of vanadium and tungsten supported on titanium oxide (TiO2) catalysts for effective reduction of emissions of toxic organic compounds from waste incineration. Experiments were conducted to evaluate the effects of the catalyst's composition, and operating conditions on benzene decomposition, and the relationship between molecular structures of catalysts and their activity was also investigated through replacing the conventional TiO2 catalyst support by nano-sized TiO2. Trace levels (1 and 10 ppm) of gaseous benzene were catalytically decomposed in a fixed-bed catalytic reactor with monolithic oxides of vanadium and tungsten supported on titanium oxide (V2O5-WO3/TiO2) catalysts under conditions simulating the cooling of waste incineration flue gas. On-line monitoring of trace benzene concentrations before and after the catalyst was achieved by means of resonance enhanced multiphoton ionization-time of flight mass spectrometry (REMPI-TOFMS). Catalysts were characterized by nitrogen adsorption, X-ray diffraction, energy dispersive X-ray spectroscopy, temperature-programmed reduction, and Raman spectroscopy. The effects of several parameters, including catalyst operating temperature, space velocity (SV) and initial benzene concentration, on catalytic oxidation of benzene were investigated. Experimental results indicate that reduction of the initial benzene concentration from 10 to 1 ppm either enhances or decreases the catalytic removal efficiency depending on the adsorption capability as well as the oxidation ability of the catalyst tested. The catalytic activity for benzene oxidation not simply relies on the vanadium content of the catalyst; the molecular structure of vanadium oxide, which is known to be influenced by both vanadium oxide loading and the type of support, is very important. Nano-sized TiO2 supported vanadium oxide catalyst (VWNT) with lowest V loading (0.75 wt.%) provides higher catalytic activity than those of the catalysts with higher V contents (1.31 and 2.92 wt.%) but supported by conventional TiO2 (VWT1 and VWT2). The relatively higher catalytic activity of VWNT may be attributed to: (a) the presence of monomeric VOx species, with one terminal V=O bond as indicated by Raman spectra; (b) fewer impurities confounding active catalytic constituents (V, W and Ti); (c) pure anatase phase of TiO2 rather than a mixture phase of anatase and rutile servicing as catalyst support besides its nano-scale particle size; (d) larger specific surface area, smaller average pore diameter, and narrower pore size distribution contribute higher adsorption ability for benzene. No obvious competition effect between NOx removal and benzene oxidation was observed in this study. Reaction rate constants and activation energies for benzene catalytic oxidation tested by the catalysts were calculated. Lower activation energy obtained from VWNT than those of the two catalysts further confirming the higher catalytic activity of VWNT. Published by Elsevier B.V.

Relationship between catalytic performance and structure of supported catalyst

Effect of support texture properties on Ni-Fe/γ-Al_2O_3 catalyst structure and catalytic performance for CO methanation

Study on the Decomposition of Trace Benzene over V2O5–WO3/TiO2-based Catalysts in Simulated Flue Gas

Influence of the Metal Oxide Support on the Surface and Catalytic Properties of Sulfated Vanadia Catalysts for Selective Oxidation of Methanol

Structure-Directing Role of Support on Toluene Catalytic Combustion over Pt/TiO2 Catalysts

Catalytic ozone oxidation toluene over supported manganese cobalt composite: influence of catalyst support

Understanding the Active-Site Nature of Vanadia-Based Catalysts for Oxidative Dehydrogenation of Ethylbenzene with CO2 Via Atomic Layer Deposited VOx on Γ-Al2o3

Surface and Catalytic Properties of V2O5–TiO2/SO42− Catalysts for the Oxidation of Methanol Prepared by Various Methods

Comparative Studies on Porous Material-Supported Pd Catalysts for Catalytic Oxidation of Benzene, Toluene, and Ethyl Acetate

Boosting the Catalytic Performance of Volatile Organic Compound Oxidation Over Platelike MnO 2 /CoAlO Catalyst by Weakening the Co–O Bond and Accelerating Oxygen Activation

Relationship Between the Molecular Structure of V2o5/Tio2 Catalysts and the Reactivity of So2 Oxidation

Tuning the Catalytic Activity and Stability of Al–Ti Bimetallic Species Immobilized on MgO–Al2O3–SiO2 for 1-Decene Oligomerization

Influence of Preparation Conditions on Pore Structure and Activity of V2O5-WO3/TiO2 Honeycomb Catalysts

Influence of texture structures of TiO2 supports on surface properties and SCR performance of V2 O5-MoO3/TiO2 catalyst

Synthesis,characterization and Catalytic Oxidation Performance of VTS-2 Molecular Sieves

Structure, Surface Acidity Basicity and Redox Properties of V2o5/Tio2 Catalysts

Non-thermal plasma synthesis of supported Cu-Mn-Ce mixed oxide catalyst towards highly improved catalytic performance for volatile organic compound oxidation

Promoting Effect of Ti on MnTiOx Catalysts for Benzene Highly Efficient Oxidation

Structure-Directing Role of Support on Hg 0 Oxidation over V 2 O 5 /TiO 2 Catalyst Revealed for NO x and Hg 0 Simultaneous Control in an SCR Reactor

Structure - Catalytic Activity Correlation in Aluminium Hydroxide Supported Vanadia Catalysts

Hierarchical laminated Al2O3 in-situ integrated with high-dispersed Co3O4 for improved toluene catalytic combustion