Abstract:A newly developed method for the formation of nanowires by self-aggregation of nanoparticles is presented in this paper. Co3C, Co-rich, and Ni nanoparticles dispersed on holey carbon grids are inserted in a vacuum oven and are co-annealed with PolyChloroTriFluoroEthylene (PCTFE) at 375 degrees C. No external electric or magnetic fields were applied. High resolution electron microscopy (HREM) was extensively used to determine the shape, size distribution and crystallographic phase of the starting and produced materials. Interestingly, after an annealing circle of 72 hours, the nanoparticles seem to self-agglomerate into nanowires which have diameters in the 5-20 nm range and lengths exceeding at cases 1 micron. The diameter of the produced wires is in the same range as the diameter of the initial nanoparticles, further supporting the notion that the nanowires have formed out of nanoparticle agglomeration. Close inspection of nanowire HREM images shows that the core structure of nanowires wider than approximately 11 nm resembles linked nanoparticles. Phase identification performed using the HREM images reveals the core is of the same phase/material as the starting nanoparticles. Since nanowires appear to form over holes on the holey carbon grid, a base growth mechanism is proposed. The fluorocarbon vapour decomposes over the transitional metal nanoparticles and carbon tubules start growing. The nanoparticles appear to be trapped inside the tubules where their close proximity enhances their fusion into a continuous core. At the studied temperature, the nanoparticle fusion is seen to be limited by the size of the nanoparticles manifested by continuous cores only in the thin nanowires. The process presented here shows that nanoparticles can spontaneously self-align into nanowires in a way and to an extent never reported before. Therefore there is certainly scope for studying this method further to reveal more information about the catalytic action of transitional metals on hydrocarbons and the exact nanowire formation mechanism. Although it is currently a matter of speculation, this process might lead to the effortless growth of nanowires at particular places when building miniature circuits.

Bundled Silicon Nitride Nanorings

Preparation and Characterization of Bundled One-Dimensional Si3N4 Single-Crystalline Nanowires by Catalytic Pyrolysis of a Polymer Precursor

Synthesis And Growth Mechanism Of Silicon Nitride Nanostructures

Ultra‐Long Single‐Crystalline Α‐si3n4nanowires: Derived from a Polymeric Precursor

Mass Production of Α-Silicon Nitride Single-crystalline Nanowires

Synthesis and Characterization of Several alpha-Silicon Nitride Nanostructures

Growth and Mechanism of Network‐Like Branched Si3N4 Nanostructures

Catalyst and Temperature Dependent Growth of Silicon Nitride Micro/Nanoribbons

Spontaneous self-agglomeration of magnetic nanoparticles into nanowires

Simultaneous Growth of Si3N4 Nanobelts and Nanodendrites by Catalyst-Assisted Crystallization of Amorphous SiCN

Array-orderly single crystalline silicon nano-wires

Polymerized Carbon Nitride Nanobells

Synthesis of Si 3 N 4 Nanowires by Catalyst‐free Nitridation of (si + SiO 2 ) Mixture

Catalystless Synthesis of Crystalline Si3N4/amorphous SiO2 Nanocables from Silicon Substrates and N2

Large‐Scale Synthesis of Rings of Bundled Single‐Walled Carbon Nanotubes by Floating Chemical Vapor Deposition

Preparation of Α-Si3n4 Nanorods Assembled Nanobelts by Crystallizing Amorphous Si3N4 Powders

Aligned Si3N4@SiO2coaxial Nanocables Derived from a Polymeric Precursor

Selective Synthesis of Carbon Nanorings via Asymmetric Intramicellar Phase-Transition-Induced Tip-to-Tip Assembly

A Simple Approach to Controllably Grow Network-Like Branched Single-Crystalline Si3n4 Nanostructures

Coaxial Nanocable Arrays: Si Sheathed with Diamond-like Carbon

Preparation Of Silicon Nanowires Under High Pressure