Abstract:The effect of cold rolling and annealing on texture development and mechanical behavior of Zircaloy-4 alloy plates was systematically investigated in the present work. The as-received plates were subjected to cold rolling with thickness reductions of 33% and 66%. Electron back-scatter diffraction and tensile tests were performed to reveal the texture and mechanical properties, respectively. Results showed that a bimodal texture was featured in the as-received plate and the texture was a fiber that spread from <<math>101¯0</math>> to <<math>112¯0</math>>. After cold rolling and annealing, a fiber with a continuous distribution from <<math>101¯0</math>> to <<math>112¯0</math>> and a fiber with a maximum at the <<math>112¯0</math>> position were present in the plates with thickness reductions of 33% and 66%. Besides, the existence of {<math>0001</math>} basal fiber was noticed, indicating more basal poles oriented toward the normal direction. Tensile tests showed that the recrystallized plate with 66% thickness reduction was more ductile and less strong than that with 33% reduction. Meanwhile, tensile properties were sensitive to strain rate, loading direction and thickness reduction. Moreover, the relationship between texture development and yield strength was discussed based on Schmid theory. Calculated results indicated that prismatic <a> slip was the predominant deformation mode and its Schmid factor values under different loading directions contributed to the anisotropy of yield strength. Due to the texture development during cold rolling and annealing, the averaged SF values for prismatic <a> slip changed with the increased thickness reduction, resulting in the variation of yield strength.</a></a>

Effect of Texture on Anisotropy of Creep Behavior of Advanced Zirconium Alloys

Effects of Texture on Inner Pressure Creep Behaviors of Advanced Zirconium Alloys

Biaxial Creep Test Study on the Influence of Structural Anisotropy on Rheological Behavior of Hard Rock

An Investigation of the Effect of High-Temperature Cyclic Straining and Creep Loading on Tensile Mechanical Properties of GH4145/SQ Alloy

Effect of texture on the room temperature tensile and creep properties of Ti–6Al–4V plate with large thickness

Unveiling the Microstructure Evolution and the Short-Time Tensile Creep Behavior in the CuCrZr Alloy

The development of texture in zirconium alloy tubes

Effect of uniaxial loading direction on mechanical responses and texture evolution in cold pilgered Zircaloy-4 tube: Experiments and modeling

Polycrystalline Effects on Irradiation Creep and Growth in Textured Zirconium

Creep Anisotropy Behavior, Deformation Mechanism, and Its Efficient Suppression Method in Inconel 625 Superalloy

Effect of zinc additions on the microstructure mechanical properties and creep behavior of as-cast Mg–3Sm–0.4Zr (wt.%) alloy

Effect of stress level on anisotropy in creep ageing behaviour of 2195-T84 Al Li alloy

Texture development and mechanical behavior of Zircaloy-4 alloy plates fabricated by cold rolling and annealing

Creep Anisotropy Characteristics and Microstructural Crystallography of Marine Engineering Titanium Alloy Ti6321 Plate at Room Temperature

The Influence of Developed Texture on the Mechanical Anisotropy and Deformation Modes of an As-Extruded Mg-Zn-Zr Alloy

A steady-state irradiation creep and thermal creep model for zirconium alloys

Strain Rate and Anisotropic Effects on Incipient Plastic Deformation of Zn–Cu–Ti Alloy Sheets

Influence of Thermal and Thermo-Mechanical Processing on the Creep Resistance of Mg-10Gd-3Y-0,4Zr Alloy

Texture and Twinning Evolution of Cold-Rolled Industrial Pure Zirconium

Effect of Dynamic Precipitation on Creep Behavior of Mg-5zn-2al(-2y) Alloy

Modeling the Micromechanical Behaviors of Zircaloy-2 Alloy under Large Deformation