Abstract:Systematic error in the point diffraction interferometer can significantly influence the measurement accuracy in the case that a high-numerical-aperture spherical surface is tested, in which wavefront aberrations could be observed and cannot be removed with the traditional calibration method. A calibration method, called symmetrical position aberration cancellation (SPAC) method, is proposed to remove the systematic error. With the SPAC method, the calibration needs two separate measurements with interferograms of opposite tilts and the systematic error can be reduced by averaging the test wavefronts of these two measurements. A geometrical optics model is presented for facilitating the calculation of the geometric aberrations that are introduced by the lateral deviation between the curvature center of the test surface and the center of the pinhole. Then a simulation model is built to analyze the influence of the lateral deviation and the numerical aperture of the surface under test on the systematic error. Both the computer simulation and experiments with a point diffraction interferometer (PDI) have been carried out to validate the proposed calibration method. In the final comparative experiment with a ZYGO interferometer, the PDI exhibits high precision in high-numerical-aperture spherical surfaces measurement based on the proposed calibration method. (C) 2015 Optical Society of America

Experimental study on subaperture testing with iterative stitching algorithm.

Aspheric and Free-Form Surfaces Test with Non-Null Sub-Aperture Stitching

Aspheric Subaperture Stitching Based on System Modeling.

Elimination of reference surface error on high-accuracy subaperture stitching

Non-null Annular Subaperture Stitching Interferometry for Aspheric Testing

Error Analysis of Sub-Aperture Synthesis for Detecting Surface Defects of Optical Components

Subaperture alignment technique for large aperture mirrors

Interferometric Measurement of Freeform Surfaces Using Irregular Subaperture Stitching

Influence of Alignment Error and Random Noise on Interferometry Flat Sub-Aperture Stitching

In-situ Sub-Aperture Stitching Measurement Based on Monoscopic Phase Measuring Deflectometry

Error Analysis of Spherical Scanning Mechanism Used for Surface Defects Detection

Aberration Calibration in High-Na Spherical Surfaces Measurement on Point Diffraction Interferometry

Sub-aperture Stitching of Aspheric Surfaces in Precision In-Situ Measurement

Research on Two Optical Methods for Aspheric Measurement

Distortion Correction in Surface Defects Evaluating System of Large Fine Optics

Comprehensive Design and Calibration of an Even Aspheric Quarter-Wave Plate for Polarization Point Diffraction Interferometry.

Subaperture moving strategy and related systematic errors in stitching interferometry of X-ray mirrors

Scanning Interferometric Method for Measuring Group Delay of Dispersive Mirrors

Studies on Image Stitching Algorithms in Machine Vision Inspection of Solar Panel

Stitching interferometry using Computer-Generated Hologram (CGH) based on sub-aperture adjustment aberration of 2-D Chebyshev polynomial

Air Flow Turbulence Orthogonality and Surface Error Estimation in Large Aperture Optical Testing