Abstract:<p>The paper presents the numerical investigations for a light civil helicopter fuselage with the purpose of reducing the helicopter drag. Two numerical methods: Reynolds-Averaged Navier-Stokes (RANS) and a hybrid RANS-LES method: improved delayed detached-eddy simulation (IDDES) method are performed for the simulation of a prototype helicopter fuselage. The RANS method is validated by a modular helicopter fuselage with experimental data, while the IDDES method has already been used in other studies and good results have been achieved. The numerical results of the civil helicopter in terms of the aerodynamic coefficients obtained by the two methods are consistent with each other. Compared to the RANS method, the IDDES approach is capable of predicting the large separation flow of the fuselage/components and the small-scale vortices in the flow field. It is found that the hybrid method captures the periodically detached separating vortices behind the skid struts, while the flow at the same position simulated by the RANS method is still attached. Moreover, separating vortices, which develop diagonally upwards, are captured at fuselage/tail-boom junction by the hybrid method, whereas RANS simulation doesn't predict. Subsequently, the design of the helicopter drag reduction is carried out at <span class="math"><math>α=0</math></span> deg angle of attack and 0.2 Mach number through shape optimization based on the numerical simulations, and the numerical results are verified by the force tests. It shows that the optimization of the landing skids aims at reducing the strong Karman vortex shedding effect induced by the skids, which greatly decreases the total drag. Combined with the optimization of the fuselage/tail-boom transition, this approach suppresses the separation flow of the fuselage and reduces the pressure drag, and the adjustment of transition slope benefits of up to 1.18% drag reduction, while the extension of transition reduces the drag by 2.64%. The optimization of tail-boom layout demonstrates that lower tail-boom layout can contribute to a drag reduction by 4.37% (RANS) and 3.89% (test), respectively, when compared to the original tail-boom layout.</p>

Drag Reduction Through Controlling Separation on the Missile Afterbodies

Drag Reduction Via Turbulent Boundary Layer Flow Control

Direct Numerical Simulation of Skin Friction Drag Reduction on Supersonic Turbulent Boundary Layers with Micro-Blowing

Effects of Micro Blowing/suction Flow Control Devices on a NACA0015 Airfoil

Numerical Investigation of Microbubble Drag Reduction on an Axisymmetric Body Based on Eulerian Multiphase Model

RESEARCH ON DRAG REDUCTION CHARACTERISTICS OF UNDERWATER VEHICLE FORE REGION WITH SHORT GROOVE STRUCTURES

Drag reduction on a transonic airfoil

Effects of Temperature on Drag Reduction in a Subsonic Turbulent Boundary Layer Via Micro-Blowing Array

Computational Study of Drag Reduction at Various Freestream Flows Using A Counterflow Jet from A Hemispherical Cylinder

Heat and drag reduction on the hypersonic nose with a nexus between active and passive control methods

Multi Parameters Control Mechanism on Drag and Heat Reduction of Opposing Jet

Experimental And Numerical Study Of Bubble Drag Reduction On A Flat Plate

Numerical Investigations of Outer-Layer Turbulent Boundary Layer Control for Drag Reduction Through Micro Fluidic-Jet Actuators

Drag Reduction of Wake Flow by Shear-Driven Rotation.

Investigation of Practical Flow Control Methodologies with RANS/LES Hybrid Methods

Mechanism study on drag reduction and thermal protection for the porous opposing jet in hypersonic flow

Computational Studies On Drag Reduction Effect By Surface Grooves

Skin-friction drag reduction by local porous uniform blowing in spatially developing compressible turbulent boundary layers

Parametric investigation on drag reduction and thermal protection characteristics of the porous opposing jet in the hypersonic flow

Coupled investigation on drag reduction and thermal protection mechanism of a double-cone missile by the combined spike and multi-jet

Numerical investigations on drag reduction of a civil light helicopter fuselage