Abstract:Drag reduction at the external surface of a cylinder in turbulent flows along the axial direction by circumferential wall motion is studied by direct numerical simulations. The circumferential wall oscillation can lead to drag reduction due to the formation of a Stokes layer, but it may also result in centrifugal instability, which can enhance turbulence and increase drag. In the present work, the Reynolds number based on the reference friction velocity and the nominal thickness of the boundary layer is 272. A map describing the relationship between the drag-reduction rate and the control parameters, namely, the angular frequency $\unicode[STIX]{x1D714}^{+}=\unicode[STIX]{x1D714}\unicode[STIX]{x1D708}/u_{\unicode[STIX]{x1D70F}0}^{2}$ and the streamwise wavenumber $k_{x}^{+}=k_{x}\unicode[STIX]{x1D708}/u_{\unicode[STIX]{x1D70F}0}$ , is obtained at the oscillation amplitude of ${A^{+}=A/u}_{\unicode[STIX]{x1D70F}0}=16$ , where $u_{\unicode[STIX]{x1D70F}0}$ is the friction velocity of the uncontrolled flow and $\unicode[STIX]{x1D708}$ is the kinematic viscosity of the fluid. The maximum drag-reduction rate and the maximum drag-increase rate are both approximately 48 %, which are respectively attained at $(\unicode[STIX]{x1D714}^{+},k_{x}^{+})=$ (0.0126, 0.0148) and (0.0246, 0.0018). The drag-reduction rate can be scaled well with the help of the effective thickness of the Stokes layer. The drag increase is observed in a narrow triangular region in the frequency–wavenumber plane. The vortices induced by the centrifugal instability become the primary coherent structure in the near-wall region, and they are closely correlated with the high skin friction. In these drag-increase cases, the effective control frequency or wavenumber is crucial in scaling the drag-increase rate. As the wall curvature normalised by the boundary layer thickness becomes larger, the drag-increase region in the $(\unicode[STIX]{x1D714}^{+},k_{x}^{+})$ plane as well as the maximum drag-increase rate also become larger. Net energy saving with a considerable drag-reduction rate is possible when reducing the oscillation amplitude. At $A^{+}=4$ , a net energy saving of 18 % can be achieved with a drag-reduction rate of 25 % if only the power dissipation due to viscous stress is taken into account in an ideal actuation system.

Drag Reduction of Wake Flow by Shear-Driven Rotation.

Vanishing of Three-Dimensionality in the Wake Behind A Rotationally Oscillating Circular Cylinder

Dynamics of Two-Dimensional Flow Around a Circular Cylinder with Flexible Filaments Attached

Drag Force on a Circular Cylinder in Stratified Flow: A Two-Dimensional Numerical Study

Drag Reduction by Axisymmetric Traveling Wavy Wall

Structured porous surface for drag reduction and wake attenuation of cylinder flow

Wake suppression of a cylinder immersed in turbulence using rotating rods

Drag Reduction in Turbulent Flows along a Cylinder by Streamwise-Travelling Waves of Circumferential Wall Velocity

Wake control of a square cylinder: Impinging the vortex cores with dual flexible splitter plates

Active control of the flow past a circular cylinder using online dynamic mode decomposition

Turbulent Drag Reduction by Traveling Wave of Flexible Wall

Bluff body drag manipulation using pulsed jets and Coanda effect

Structural Drag Reduction in Taylor-Couette Flow

Drag Reduction in Turbulent Channel Flows by a Spanwise Traveling Wave of Wall Blowing and Suction

Turbulent wake suppression of circular cylinder flow by two small counter-rotating rods

Coherent Structures in Wall Turbulence and Mechanism for Drag Reduction Control

Wake Flow Control of a Square Cylinder Via Distributed Jets over the Rear Porous Surface

Control of Cylinder Wake Flow and Noise Through a Downstream Porous Treatment

Active control of circular cylinder flow by affiliated rotating cylinders

Wake Dynamics and Hydrodynamic Forces of a Circular Cylinder Beneath a Free Surface

Drag reduction using a self-adaptive flexible coating