Abstract:Drag reduction at the external surface of a cylinder in turbulent flows along the axial direction by circumferential wall motion is studied by direct numerical simulations. The circumferential wall oscillation can lead to drag reduction due to the formation of a Stokes layer, but it may also result in centrifugal instability, which can enhance turbulence and increase drag. In the present work, the Reynolds number based on the reference friction velocity and the nominal thickness of the boundary layer is 272. A map describing the relationship between the drag-reduction rate and the control parameters, namely, the angular frequency $\unicode[STIX]{x1D714}^{+}=\unicode[STIX]{x1D714}\unicode[STIX]{x1D708}/u_{\unicode[STIX]{x1D70F}0}^{2}$ and the streamwise wavenumber $k_{x}^{+}=k_{x}\unicode[STIX]{x1D708}/u_{\unicode[STIX]{x1D70F}0}$ , is obtained at the oscillation amplitude of ${A^{+}=A/u}_{\unicode[STIX]{x1D70F}0}=16$ , where $u_{\unicode[STIX]{x1D70F}0}$ is the friction velocity of the uncontrolled flow and $\unicode[STIX]{x1D708}$ is the kinematic viscosity of the fluid. The maximum drag-reduction rate and the maximum drag-increase rate are both approximately 48 %, which are respectively attained at $(\unicode[STIX]{x1D714}^{+},k_{x}^{+})=$ (0.0126, 0.0148) and (0.0246, 0.0018). The drag-reduction rate can be scaled well with the help of the effective thickness of the Stokes layer. The drag increase is observed in a narrow triangular region in the frequency–wavenumber plane. The vortices induced by the centrifugal instability become the primary coherent structure in the near-wall region, and they are closely correlated with the high skin friction. In these drag-increase cases, the effective control frequency or wavenumber is crucial in scaling the drag-increase rate. As the wall curvature normalised by the boundary layer thickness becomes larger, the drag-increase region in the $(\unicode[STIX]{x1D714}^{+},k_{x}^{+})$ plane as well as the maximum drag-increase rate also become larger. Net energy saving with a considerable drag-reduction rate is possible when reducing the oscillation amplitude. At $A^{+}=4$ , a net energy saving of 18 % can be achieved with a drag-reduction rate of 25 % if only the power dissipation due to viscous stress is taken into account in an ideal actuation system.

Structural Drag Reduction in Taylor-Couette Flow

Numerical Simulation of Turbulent Taylor-Couette Flow with High Taylor Number and Large Radius Ratio in High-Speed Canned Motor Pump Internals

CFD Simulation of Shear Flow and Mixing in a Taylor–Couette Reactor with Variable Cross-Section Inner Cylinders

Drag reduction in turbulent Taylor–Couette flow by axial oscillation of inner cylinder

Study on Turbulent Taylor-Couette Flow with High Reynolds Number and Large Radius Ratio in High-Speed Canned Motor Pump Internals

Drag Reduction in Turbulent Flows along a Cylinder by Streamwise-Travelling Waves of Circumferential Wall Velocity

Dynamics of Two-Dimensional Flow Around a Circular Cylinder with Flexible Filaments Attached

Drag Reduction of Wake Flow by Shear-Driven Rotation.

Drag reduction study of naturally occurring oscillating axial flow induced by helical corrugated surface in Taylor Couette flow

Effect of micro-grooves on drag reduction in Taylor-Couette flow

Application and Optimization of Drag Reduction Characteristics on the Flow Around a Partial Grooved Cylinder by Using the Response Surface Method

Sustainable drag reduction in Taylor-Couette flow using riblet superhydrophobic surfaces

Drag reduction using velocity control in Taylor–Couette flows

Skin-friction drag reduction by axial oscillations of the inner cylinder in turbulent Taylor–Couette flows

Drag Reduction by Spanwise Wall Oscillation in Wall-Bounded Turbulent Flows

Numerical study on the mechanism of drag modulation by dispersed drops in two-phase Taylor-Couette turbulence

Frictional drag reduction in bubbly Couette–Taylor flow

Turbulent drag reduction in Taylor-Couette flows using different super-hydrophobic surface configurations

Flow structures and wall parameters on rotating riblet disks and their effects on drag reduction

Coherent Structures in Wall Turbulence and Mechanism for Drag Reduction Control