Abstract:Pipes inevitably encounter high ambient pressure and bending moment during the deepwater pipe-laying process, which can lead to elliptical buckling and even deterioration failure,. For the safety of pipe-laying operation, available formulas for the pipe stability are established on the basis of the assumption of uniform deformation along the tube length and symmetrical buckling. This method can predict the nonlinear response of elliptical collapse of steel circular tubes for different ratios of diameter to thickness (D/t) under pure bending or combined bending and external pressure. In these formulas, the strain-displacement relationship is deduced from the nonlinear ring theory, and the Ramberg-Osgood constitutive model is applied to simulate the inelastic material behavior. Meanwhile, the principle of virtual work is adopted to derive the equilibrium equations. A set of equations is solved by the Newton-Raphson method, and the iterative scheme contains nested iteration for the constitutive relation. In order to check the effectiveness of this theoretical method, illustrative examples are presented in this paper. Besides, the numerical simulation is carried out by use of ANSYS. A comparison of the results shows that the theoretical method can provide reasonable prediction for engineering practice.

Hardening-softening Behaviour of Circular Pipes under Bending and Tension

Experimental Investigation of Circular Steel Tubes with Tapered Ends Subjected to Bending,compression and Torsion

Limit bending moment for pipes with two circumferential flaws under combined internal pressure and bending

On the Collapse Failure of Dented Pipes under Bending Moment and External Pressure

EXPERIMENTAL STUDY ON CENTRIFUGAL CONCRETE-FILLED STEEL TUBES UNDER BENDING AND TORSION

The research on the critical loading path of thick-walled pipes under external pressure and cyclic bending

Inelastic behavior of pipe subjected to steady extension and cyclic bending

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

Experimental Investigation And Design Of Concrete-Filled Cold-Formed Thin-Walled Steel Tubes Subject To Bending

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

Bending Moment Capacity of Pipes

Mechanical Behavior of Steel Pipe Bends: An Overview

Elasto-plastic behavior of pipe subjected to steady axial load and cyclic bending

Mechanical Behaviors Of Steel Strip Reinforced Flexible Pipes Under Bending

Pure Bending Behavior of Pipe Reinforced by Steel Wires (Psp)

Inclusion of Torsion with Bending and Pressure Loads for Pipes with Thin-Wall Regions

Numerical Study on Plastic Strain Distributions and Mechanical Behaviour of a Tube under Bending

Ratcheting Limit Assessment of Straight Pipes Subjected to Combinedinternal Pressure and Reversed Bending Moments.pdf

Buckling Analysis of Plastic Pipe Reinforced by Cross-Winding Steel Wire under Bending