Abstract:Unstable surface species such as residual lithium compounds and surface lattice oxygen at charge state are detrimental factors for the battery performance of Ni-rich cathode (LiNixCoyMn1−x−yO2, x ≥ 0.6, NCM), which induce serious side reactions and lead to rapid capacity loss during cycling. With the advantages of sufficient contacts between gas and solid, gas reactants are introduced to reducing residual lithium compounds via gas-solid reactions or building protective coatings to isolate surface lattice oxygen from the electrolyte via gas-phase deposition, which effectively enhances the cycling stability of NCM. Atomic layer deposition (ALD), as a special coating technology, possesses both the nature of the gas-solid reaction and gas-phase deposition. It is significant to investigate the mechanism of ALD in enhancing the cycling stability of NCM. Here, we report a method to improving the rate capacity and cycling stability of single-crystal NCM via Al2O3 and B2O3 ALD by constructing a highly Li-ions conductive and electrochemical stable surface. The ultrathin coatings are uniformly coated on the surface of NCM. Moreover, surface composition characterizations show the reductions of residual lithium compounds and formations of lithium-containing coatings after the ALD process. By adding a post-annealing process, Al3+ cations and BO3- polyanions doping form on the surface of NCM, which robustly enhanced the stability of surface lattice oxygen of NCM via strong Al-O bond and B-O bond. Moreover, as acidic oxides, B2O3 shows better performance than Al2O3 in reducing residual lithium compounds during the ALD process. Different from Al3+ cations doping occupying the transition metal ions position, BO3- polyanions doping occupies the oxygen ions position, which does not deteriorate the capacity of NCM. Transformation of residual lithium compounds and stabilizing surface lattice oxygen on NCM greatly decrease the formation of LiF and degradation of surface structure, which is the key to the improvement of rate capacity and cycling stability.

Surface Treatment of LiNi0.8Co0.2O2 Cathode Material for Lithium Secondary Batteries

Surface Modification and Characterization of LiNi_(0.8)Co_(0.2)O_2

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Surface Coating with Li-Ti-O to Improve the Electrochemical Performance of Ni-rich Cathode Material

Tuning the surface of LiNi0.8Co0.1Mn0.1O2 primary particle with lithium boron oxide toward stable cycling

A novel perspective on surface modification of LiNi0.5Co0.2Mn0.3O2 cathode materialfor lithium‐ion batteries

Research on LiNi_xMn_(2-x)O_4 Surface Modification of LiCoO_2 As Cathode Materials for Li-ion Batteries

Fully coating of Mg3B2O6 in nonaqueous solution on Ni-rich LiNi0.8Co0.1Mn0.1O2 secondary particles to improve cycling stability of lithium-ion batteries

A scalable dry chemical method for lithium borate coating to improve the performance of LiNi0.90Co0.06Mn0.04O2 cathode material

Surface coating with Li3BO3 protection layer to enhance the electrochemical performance and safety properties of Ni-rich LiNi0.85Co0.05Mn0.10O2 cathode material

Improved Electrochemical Behavior and Thermal Stability of Li and Mn-Rich Cathode Materials Modified by Lithium Sulfate Surface Treatment

Cathode materials modified by surface coating for lithium ion batteries

Multifunctional Li2O-2B2O3 Coating for Enhancing High Voltage Electrochemical Performances and Thermal Stability of Layered Structured LiNi0.5Co0.2Mn0.3O2 Cathode Materials for Lithium Ion Batteries

Surface modification of LiNi1/3Co1/3Mn1/3O2 with Cr2O3 for lithium ion batteries

Facile Surface Coatings for Performance Improvement of NMC811 Battery Cathode Material

(Digital Presentation) Simultaneous Transforming Residual Lithium Compounds and Stabilizing Surface Lattice Oxygen for Ni-Rich Cathode Via Atomic Layer Deposition and Post-Annealing

Enhanced Electrochemical Performance of LiNi0.8Co0.1Mn0.1O2 Cathode Material for lithium ion batteries by WO3 surface coating

An Effective Way of Improving the Performance of Ni‐Rich LiNi 0.82 Co 0.12 Mn 0.06 O 2 Cathode in Lithium‐Ion Battery Via Borate Coating

Enhancing electrochemical performance of lithium-rich manganese-based cathode materials through lithium sulfate coating

Improving the Electrochemical Performance of Ni-rich Cathode Material LiNi 0.815 Co 0.15 Al 0.035 O 2 by Removing the Lithium Residues and Forming Li 3 PO 4 Coating Layer

Simultaneous B/W Dual Coating on Ultra-High Nickel Single Crystal Cathode Material for Lithium-Ion Batteries