Abstract:Unstable surface species such as residual lithium compounds and surface lattice oxygen at charge state are detrimental factors for the battery performance of Ni-rich cathode (LiNixCoyMn1−x−yO2, x ≥ 0.6, NCM), which induce serious side reactions and lead to rapid capacity loss during cycling. With the advantages of sufficient contacts between gas and solid, gas reactants are introduced to reducing residual lithium compounds via gas-solid reactions or building protective coatings to isolate surface lattice oxygen from the electrolyte via gas-phase deposition, which effectively enhances the cycling stability of NCM. Atomic layer deposition (ALD), as a special coating technology, possesses both the nature of the gas-solid reaction and gas-phase deposition. It is significant to investigate the mechanism of ALD in enhancing the cycling stability of NCM. Here, we report a method to improving the rate capacity and cycling stability of single-crystal NCM via Al2O3 and B2O3 ALD by constructing a highly Li-ions conductive and electrochemical stable surface. The ultrathin coatings are uniformly coated on the surface of NCM. Moreover, surface composition characterizations show the reductions of residual lithium compounds and formations of lithium-containing coatings after the ALD process. By adding a post-annealing process, Al3+ cations and BO3- polyanions doping form on the surface of NCM, which robustly enhanced the stability of surface lattice oxygen of NCM via strong Al-O bond and B-O bond. Moreover, as acidic oxides, B2O3 shows better performance than Al2O3 in reducing residual lithium compounds during the ALD process. Different from Al3+ cations doping occupying the transition metal ions position, BO3- polyanions doping occupies the oxygen ions position, which does not deteriorate the capacity of NCM. Transformation of residual lithium compounds and stabilizing surface lattice oxygen on NCM greatly decrease the formation of LiF and degradation of surface structure, which is the key to the improvement of rate capacity and cycling stability.

Fully coating of Mg3B2O6 in nonaqueous solution on Ni-rich LiNi0.8Co0.1Mn0.1O2 secondary particles to improve cycling stability of lithium-ion batteries

Realizing Superior Cycling Stability of Ni-Rich Layered Cathode by Combination of Grain Boundary Engineering and Surface Coating

Tuning the surface of LiNi0.8Co0.1Mn0.1O2 primary particle with lithium boron oxide toward stable cycling

Inverse Spinel-Structured Mg2MnO4 Coating to Enable Superior Thermal Stability of LiNi0.83Co0.12Mn0.05O2 Cathodes for Lithium-Ion Batteries

Surface coating with Li3BO3 protection layer to enhance the electrochemical performance and safety properties of Ni-rich LiNi0.85Co0.05Mn0.10O2 cathode material

Boosting cycle stability of NCM811 cathode material via 2D Mg-Al-LDO nanosheet coating for lithium-ion battery

Excellent electrochemical properties of Ni-rich LiNi0.88Co0.09Al0.03O2 cathode materials co-modified with Mg-doping and LiBO2-coating for lithium ion battery

Advancing Lithium-Ion Batteries' Electrochemical Performance: Ultrathin Alumina Coating on Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials

A novel perspective on surface modification of LiNi0.5Co0.2Mn0.3O2 cathode materialfor lithium‐ion batteries

Enhanced rate performance and mitigated capacity decay of single-crystal LiNi0.8Co0.1Mn0.1O2 by the synergism of Mg doping and V2O5 coating

Improving rate capacity and cycling performance of lithium-rich high-Mn Li-1.8[Mn0.7Co0.15Ni0.15]O-2.675 cathode materials by Li2SiO3 coating

Removing lithium residues via H3BO3 washing and concurrent in-situ formation of a lithium reactive coating on Ni-rich cathode materials toward enhanced electrochemical performance

MnPO4‐Coated Li(Ni0.4Co0.2Mn0.4)O2 for Lithium(‐Ion) Batteries with Outstanding Cycling Stability and Enhanced Lithiation Kinetics

Enhanced High-Voltage Cycling Stability of Ni-rich LiNi0.8Co0.1Mn0.1O2 Cathode Coated with Li2O–2B2O3

Enhanced cycling stability of Li[Li0.2Mn0.54Ni 0.13Co0.13]O2 by surface modification of MgO with melting impregnation method

Realizing primary/secondary particle co-coating with Co x B for lithium-rich cathodes in high-performance lithium-ion batteries

(Digital Presentation) Simultaneous Transforming Residual Lithium Compounds and Stabilizing Surface Lattice Oxygen for Ni-Rich Cathode Via Atomic Layer Deposition and Post-Annealing

High structure stability and Li-conduction of LiNi0.8Co0.1Mn0.1O2 cathode co-coated by Al2O3 and LiNbO3 for high performance lithium-ion battery

Bulk Mg-doping and Surface Polypyrrole-Coating Enable High-Rate and Long-Life for Ni-rich Layered Cathodes

Facile Surface Coatings for Performance Improvement of NMC811 Battery Cathode Material

Amorphous Li2ZrO3 nanoparticles coating Li[Li0·17Mn0·58Ni0.25]O2 cathode material for enhanced rate and cyclic performance in lithium ion storage