Abstract:Ni-rich NCM-based positive electrode materials exhibit appealing properties in terms of high energy density and low cost. However, these materials suffer from different degradation effects, especially at their particle surface. Therefore, in this work, tungsten oxide is evaluated as a protective inorganic coating layer on LiNi0.8Co0.1Mn0.1O2 (NCM-811) positive electrode materials for lithium-ion battery (LIB) cells and investigated regarding rate capability and cycling stability under different operation conditions. Using electrochemical impedance spectroscopy, the interfacial resistance of uncoated and coated NCM-811 electrodes is explored to study the impact of the coating on lithium-ion diffusion. All electrochemical investigations are carried out in LIB full cells with graphite as a negative electrode to ensure better comparability with commercial cells. The coated electrodes show an excellent capacity retention for the long-term charge/discharge cycling of NCM-811-based LIB full cells, i.e., 80% state-of-health after more than 800 cycles. Furthermore, the positive influence of the tungsten oxide coating on the thermal and structural stability is demonstrated using postmortem analysis of aged electrodes. Compared to the uncoated electrodes, the surface-modified electrodes show less degradation effects, such as particle cracking on the electrode surface and improvement of the thermal stability of NCM-811 in the presence of electrolyte.

Surface Modification and Characterization of LiNi_(0.8)Co_(0.2)O_2

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Surface Modification and Electrochemical Properties of Li-Rich Layered Cathode Materials for Lithium-Ion Batteries

Surface Treatment of LiNi0.8Co0.2O2 Cathode Material for Lithium Secondary Batteries

Research on LiNi_xMn_(2-x)O_4 Surface Modification of LiCoO_2 As Cathode Materials for Li-ion Batteries

A novel perspective on surface modification of LiNi0.5Co0.2Mn0.3O2 cathode materialfor lithium‐ion batteries

Can surface modification be more effective to enhance the electrochemical performance of lithium rich materials?

Surface Modification of Li(Ni0.6Co0.2Mn0.2)O2 Cathode Materials by Nano-Al2O3 to Improve Electrochemical Performance in Lithium-Ion Batteries

Surface modification of LiNi1/3Co1/3Mn1/3O2 with Cr2O3 for lithium ion batteries

Surface Coating with Li-Ti-O to Improve the Electrochemical Performance of Ni-rich Cathode Material

Multifunctional Li2O-2B2O3 Coating for Enhancing High Voltage Electrochemical Performances and Thermal Stability of Layered Structured LiNi0.5Co0.2Mn0.3O2 Cathode Materials for Lithium Ion Batteries

Tuning the surface of LiNi0.8Co0.1Mn0.1O2 primary particle with lithium boron oxide toward stable cycling

Enhanced Electrochemical Performance of LiNi0.8Co0.1Mn0.1O2 Cathode Material for lithium ion batteries by WO3 surface coating

Surface Modification of Ni-Rich LiNi0.8Co0.1Mn0.1O2 Cathode Material by Tungsten Oxide Coating for Improved Electrochemical Performance in Lithium-Ion Batteries.

Cathode materials modified by surface coating for lithium ion batteries

Enhancing Electrochemical Performance of LiNi0.6Co0.2Mn0.2O2 by Lithium-ion Conductor Surface Modification

Enhancing electrochemical performance of lithium-rich manganese-based cathode materials through lithium sulfate coating

Effect of TiO 2 -Coating on Structure and Electrochemical Performance of LiCo 0.2 Ni 0.4 Mn 0.4 O 2

Facile Surface Coatings for Performance Improvement of NMC811 Battery Cathode Material

Surface and grain boundary coating for stabilizing LiNi0.8Mn0.1Co0.1O2 based electrodes

Modification research of LiAlO2-coated LiNi0.8Co0.1Mn0.1O2 as a cathode material for lithium-ion battery