Abstract:Cellulosic paper products based on sustainable resources are of interest as a replacement for petroleum-based plastics, for example, in packaging applications. Improvements are desired for mechanical performance, recyclability, and possibilities to shape fiber networks into complex geometries. Commercial bleached wood fibers from the kraft process have insufficient mechanical properties for many applications, even with beating and additives. In addition, mechanical properties of paper structures are significantly reduced after recycling. Here, recycling and 3D shaping performance of holocellulose fibers are compared with kraft fibers and investigated in the context of wood fiber tailoring for eco-friendly materials. Holocellulose fibers from wood are prepared by mild peracetic acid delignification for well-preserved nanostructures and hemicellulose content (28 wt %). Paper structures of about 50% porosity are prepared from both types of fibers by vacuum filtration and drying. Mechanical tensile tests are performed, and fracture surfaces are investigated. The effects of recycling on the fiber structure (chemical composition, morphology, and crystallite size in fibers) and mechanical paper properties are reported. 3D-shaping performance is studied using compression molding with a double-curved mold. Holocellulose paper structures showed much better mechanical properties than kraft fiber paper (Young's modulus 10 GPa, ultimate tensile strength 100 MPa), as well as better recycling performance (only 26% decrease in strength after 5 cycles) and 3D formability. The well-preserved cellulose and hemicellulose components are important, as well as the homogeneity of the fiber cell wall nanostructure. This preserves the intrinsic mechanical properties of fibers, reduces hornification effects, and provides strong interfiber adhesion. Furthermore, the water-soluble hemicelluloses present at the cellulose-cellulose interface are able to facilitate recycling and 3D forming.

The Mechanism of Quality Decay of Secondary Fiber During Recycling

Test Research on the Influencing Factors of the Mechanical Property of the Polypropylene Fiber Recycled Concrete

Effects of Deinking Mode on Pore Structure and Crystallization Property of Recycled Fiber

Upgrading waste paper by in-situ calcium carbonate formation

Defining quality by quantifying degradation in the mechanical recycling of polyethylene

Performance analysis of recycled carbon fiber under recycling process parameters optimized using response surface methodology

FIBER CLASSIFICATION, PHYSICAL AND OPTICAL PROPERTIES OF RECYCLED PAPER

Effect of surfactants on the cellulosic fiber characteristics during paper recycling

Effect of Mechanical Recycling on Molecular Structure and Rheological Properties of High-Density Polyethylene (HDPE)

Study on Modifying of Polypropylene and Calcium Carbonate

Study on recycled carbon fiber obtained by thermal activated oxide semiconductor and mechanical properties of its reinforced polymer composites

Characterization of carbon fibers recovered through mechanochemical-enhanced recycling of waste carbon fiber reinforced plastics

Study on the Effect of A Shallowly Air - Flotation Equipment Applied in Tissue Papermaking Process

Recycling and repurposing of waste carbon nanofiber polymers: A critical review

Effect of thermal-oxidative and mechanical degradation of recycled LDPE on foaming

Study On The Accumulation Of Pollutants Of Recycling Water In Regenerated Papermaking Mills

Recycling Without Fiber Degradation—Strong Paper Structures for 3D Forming Based on Nanostructurally Tailored Wood Holocellulose Fibers

Degradation of PVDF-Coated Fabrics after Engineering Applications: Correlations between Surface Microstructure, Physical Properties, and Mechanical Properties Based on Statistical Analysis

Influences on Textile and Mechanical Properties of Recycled Carbon Fiber Nonwovens Produced by Carding

Study on oxidation behavior during process of recycling carbon fibers from CFRP by pyrolysis

Effect of Mechanical Recycling on the Mechanical Properties of PLA-Based Natural Fiber-Reinforced Composites