Abstract:An in-situ measurement system for porous alumina (PA) film based on atomic force microscope (AFM) in liquid and reflectometric interference spectroscopy (RIFS) was developed. The present article briefly discusses the principle and structure of the system, and introduces its unique characteristic. The system consists of probe unit, XY scanner, Z-piezo feedback system, computer and software, fiber optic spectrometer, anodization control circuitry etc. When a white light beam illuminates the surface of the film, the reflective light beams at the front and back side of the layer are coherent, and lead to periodical amplifications and extinction in the reflective spectrum with the information of the optical thickness of the film. A fiber optic spectrometer was applied in the system which input the refractive spectrum into the computer by which the optical thickness of the film was calculated. Meanwhile according to the surface topography of PA films by AFM in liquid, the effective refractive index was calculated based on Maxwell-Garnett theory and coherent potential approximation (CPA). So the thickness of PA films could be gained at last. To checkout the feasibility and stability of the system, the real-time scanning and thickness measurement experiments were done during anodization of Al sheets in oxalic acid aqueous solution. In the experiment, the authors used 25 mm diameter aluminum (Al) sheets with 99.999% purity and 0.4 mm thickness as the anode, and graphite rod as the cathode. The pretreatment-cleaned Al sheets were anodized in an aqueous solution of 0.5 mol x L(-1) oxalic acid at the constant temperature (20 +/- 0.2) degrees C with 20 mA x cm(-2) anodization electronic current density. Real-time AFM images of PA film were successfully obtained during anodization. The pore-ratios of Al sheet were 7.81% and 13.83% at oxidizing time 150 min and 180 min respectively. Correspondingly, the effective indexes were calculated to be 1.62 and 1.60, respectively. Combining the reflective spectrum gained by the fiber optic spectrometer, the wave number differences between the two adjacent extrema were 57.69 mm(-1) and 50.00 mm(-1). Based on reflectometric interference spectroscopy, the thickness of PA films was found to be 5.35 and 6.25 microm with oxidizing time 150 min and 180 min respectively. The system has characteristics of convenient manipulation, non-destructive and high-resolution in-situ measurement. And the surface morphology, pore-ratio and effective refractive index can also be gained at the same time.

Direct structure depth profiling of polycrystalline thin films by X-ray diffraction and its application

Characterization of Polycrystalline Gradient Thin Film by X-ray Diffraction Method

Method to Analyze and Evaluate the Depth Profile of the Three Dimensional Residual Stresses State with X-ray

Computed depth profile method of X-ray diffraction and its application to Ni/Pd films

X‐ray standing wave assisted XANES for depth dependent chemical state analysis of Cr in Cr2O3/Cr bilayer structure

Depth resolution optimized sputter depth profiling of a polycrystalline Al layer

Analysis of Surface and Interface Modifications of Thin Multilayered Films

Non-destructive depth profile evaluation of multi-layer thin film stack using simultaneous analysis of data from multiple X-ray photoelectron spectroscopy instruments

Precise Strain Profile Measurement As a Function of Depth in Thermal Barrier Coatings Using High Energy Synchrotron X-rays

Sub‐Nanometer Depth Profiling of Native Metal Oxide Layers Within Single Fixed‐Angle X‐Ray Photoelectron Spectra

Study of In-Situ Measurement System for Porous Alumina Film Based on AFM and Reflectometric Interference Spectroscopy

In situ XRD measurements to explore phase formation in the near surface region

Electric Field Intensity Modulated Scattering as a Thin-Film Depth Probe

XPS for non-destructive depth profiling and 3D imaging of surface nanostructures

High-throughput Structure Determination of Polycrystalline Functional Materials: a Platform for Automated 3ded/microed Data Collection

Depth Profiling of Nanometer Coatings by Low Temperature Plasma Probe Combined with Inductively Coupled Plasma Mass Spectrometry.

Depth dependent local structures in thin films unraveled by grazing incidence x-ray absorption spectroscopy

Depth profiles of the interfacial strains of Si 0.7 Ge 0.3 /Si using three-beam Bragg-surface diffraction

Three-Beam Diffraction Anomalous Fine Structure of Thin Films

X-ray diffraction studies of miscut crystal surfaces and overlayers: a dynamical diffraction approach

Versatile technique for assessing thickness of 2D layered materials by XPS