Abstract:To address the limitations in actuator selection within strong magnetic environments, this study introduces a novel inertial piezoelectric actuator with asynchronous dual-foot motion, which meets the need for high-precision actuation in strong magnetic field environments. The design principle is to use two driving feet that generate elliptical motion in an alternating method to achieve continuous linear motion of the actuator. This approach enhances load capacity, speed, and stepping characteristics. The design allows for better control of backward motion without modifying the driving waveform, thus improving the actuator's speed and ensuring consistent performance in both directions. A finite element model of the proposed actuator stator is developed and analyzed using commercial software to optimize its dimensional parameters. A prototype is fabricated, and experimental investigations are carried out. The results indicate that the dual asynchronous driving method significantly increases the speed of the actuator and the consistency of the motion by improving stepping characteristics. The prototype reached a maximum speed of 8.98 mm/s, supported a maximum load of 4.5 N, and achieved a displacement resolution of 19 nm. Finally, the strong magnetic field environmental test and MRI image quality test were conducted, and experimental results confirmed that the actuator has superior magnetic compatibility, highlighting its potential for precision applications in challenging environments. This research proposes new methods to enhance the retraction characteristics and output performance of inertial actuators, with their excellent magnetic field compatibility anticipated to be applied in future MRI-compatible injectors, puncture devices, or other actuating mechanisms.

A High Bandwidth Piezoelectric Suspension for High Track Density Magnetic Data Storage Devices

Mini Piezoelectric Actuator for Rigid Disk Drives with High Track Density

Nano-and Micro-Actuations of Hard Disk’s Head Positioning System: Actuator Design and Evaluation of Performance

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

U-type Piezoelectric Thin-Film Microactuator for Hard Disk Drives

Design and evaluation of PZT thin-film micro-actuator for hard disk drives

A Multi-Mode Self-Centering Piezo Actuator: Design, Analysis and Its Application in Full-Stroke Microscopic Imaging

Fabrication of Piezoelectric Ceramic Micro-Actuator and Its Reliability for Hard Disk Drives

An asynchronous dual-foot inertial piezoelectric actuator with strong magnetic compatibility

Track-following and Seek/settle Control Schemes for High Density Disk Drives with Dual-Stage Actuators

Study on Fabrication and Properties for a Novel Micro-actuated Element

Design of Precision Positioning Stage Driven by Voice Coil Motor with Integrated Active Eddy Current Damper

Novel Magnetic Suspension Platform with Three Types of Magnetic Bearings for Mass Transfer

Preparation and Properties of Piezoelectric Elements by Sol-Gel Process for Micro-actuator Application

Magnetic Circuit Design for Six-Wire Suspension Type Actuator in a Super Multioptical Pickup

Ring-shaped Traveling Wave Ultrasonic Motor for High-Output Power Density with Suspension Stator

Fabrication and FEM Analysis of a Piezoelectric Thin-Film Microactuator

High-order resonance of three axis suspension wire actuator in optical pickup

A Novel Nanopositioning Stage Integrated with Voice Coil Motor and Active Eddy Current Damper

A Dual-Stage Piezoelectric Stack for High-Speed and Long-Range Actuation

DEFLECTION CHARACTERISTICS OF SPLIT ELECTRODE INPLANE BENDING PIEZOELECTRIC ACTUATORS WITH VARYING WIDTH