Abstract:To address the limitations in actuator selection within strong magnetic environments, this study introduces a novel inertial piezoelectric actuator with asynchronous dual-foot motion, which meets the need for high-precision actuation in strong magnetic field environments. The design principle is to use two driving feet that generate elliptical motion in an alternating method to achieve continuous linear motion of the actuator. This approach enhances load capacity, speed, and stepping characteristics. The design allows for better control of backward motion without modifying the driving waveform, thus improving the actuator's speed and ensuring consistent performance in both directions. A finite element model of the proposed actuator stator is developed and analyzed using commercial software to optimize its dimensional parameters. A prototype is fabricated, and experimental investigations are carried out. The results indicate that the dual asynchronous driving method significantly increases the speed of the actuator and the consistency of the motion by improving stepping characteristics. The prototype reached a maximum speed of 8.98 mm/s, supported a maximum load of 4.5 N, and achieved a displacement resolution of 19 nm. Finally, the strong magnetic field environmental test and MRI image quality test were conducted, and experimental results confirmed that the actuator has superior magnetic compatibility, highlighting its potential for precision applications in challenging environments. This research proposes new methods to enhance the retraction characteristics and output performance of inertial actuators, with their excellent magnetic field compatibility anticipated to be applied in future MRI-compatible injectors, puncture devices, or other actuating mechanisms.

Magnetic Circuit Design for Six-Wire Suspension Type Actuator in a Super Multioptical Pickup

Design and Research of a Linear Actuator for Electric Vehicle Active Suspension

Magnet circuit design and optimization of giant magnetostrictive transducer

A Double-Magnetic-Source Magnetic Circuit with Pole Shoes for an Electromagnetic Angular Vibration Exciter

Simulation and Experimental Study of the Coupling Drive Magnetic Field for Embedded Giant Magnetostrictive Actuators

High-Sensitivity Actuator with New Magnetic Circuit in Optical Pickup

High Performance Three-Axis Actuator in Super-Multi Optical Pickup with Low Crosstalk Force

Design and Analysis of Superconducting Magnets of a New Mixed Maglev Model

Design and Analysis of a 2-DOF Electromagnetic Actuator with an Improved Halbach Array for the Magnetic Suspension Platform

Magnetic circuit optimisation and actuator suspension experiment of the 6‐DOF magnetic suspension platform for mini/micro LED

Design of a Four-Sided Magnetic Circuit for an Optical Pickup Actuator for Multilayer High-Density Optical Disks

Design and Analysis of a 6-DOF Magnetic Suspension Platform with an Improved Permanent Magnetic Array

Magnetic Field Analysis of a New 3-Axis Optical Pickup Actuator Based on ANSYS

Analysis and Control of Seven-Phase Permanent-Magnet Bearingless Motor with Single Set of Half-Coiled Winding.

Axial Active-Passive Suspension Electromagnetic System in Radial Air Gap for the Maglev Pump.

ON SIMULATION OF 3-AXIS SUSPENSION WIRE BLUE-RAY OPTICAL PICKUP ACTUATOR WITH INCLUDED ANGLE BETWEEN WIRES

Analysis and Comparison of Inductance and Suspension Force for 2-4 Type and 4-2 Type Multiphase Permanent Magnet Bearingless Motors

DESIGN FOR ELLIPSE MOTION DRIVEN MOTOR MADE OF GIANT MAGNETOSTRICTIVE MATERIAL

Performance Analysis of a New Adjustable Superconducting Magnet Suspension System

Novel Magnetic Suspension Platform with Three Types of Magnetic Bearings for Mass Transfer

An asynchronous dual-foot inertial piezoelectric actuator with strong magnetic compatibility