Abstract:The addition of basic additives in steelmaking processes is essential because these lead to slag adaptation and enable refining reactions. In calcination treatment, the process parameters temperature and dwell time influence the decomposition of dolomite as a magnesium‐containing lime substitute. It results in specific properties such as varying residual fractions of carbonates CaCO3·MgCO3 and porosity. The properties affect the dissolution kinetics, and the fast and complete dissolution is of interest. Hence, the static high‐temperature dissolution tests using dolomite‐based samples in diverse conditions (raw, modified, soft‐burnt, and hard‐burnt) are executed to determine the impact of the calcination state. The specimens are immersed in synthetic electric arc furnace slag, including 10 wt% Al2O3, 25 wt% SiO2, 25 wt% CaO, 8 wt% MnO, and 32 wt% FeO. The dolomite or dolime dissolves in the stagnant oxidic melt within the reaction time of 10 min at 1450 °C. The resulting chemistries of quenched slags, representing the current dissolution status, are examined by scanning electron microscopy using energy‐dispersive X‐ray spectroscopy analysis on metallographically prepared cross‐sections and via X‐ray fluorescence analysis of mechanically extracted slag fractions. The dissolution performance is characterized and compared for the different additive materials. The chemical and physical properties of additives affect the dissolution behavior in slag. Applying raw dolomite, the calcination happens locally in liquid slag. Soft‐ and hard‐burnt dolime and modified materials are fabricated previously by decomposition or adjustment at high temperatures. The process conditions are used to influence the fraction of remaining carbonates and the eventual sintering of the particles.

Effect of Calcining Process on Assimilation and Carbonation of Calcined Dolomite Slurry

Calcination–carbonation Durability of Nano CaCO3 Doped with Li2SO4

Influences of calcining-and-slaking processes on activity of dolomite

Study of Carbonizing Processes for Sintered Dolomite

Carbonation Characteristics in Calcium-sorbents Cyclic Calcination/Carbonation Reaction Process

Calcination Condition of Dolomite‐Based Materials Influencing Static Dissolution in Synthetic Electric Arc Furnace Slag

Experimental study on CO2 capture performance of dolomite during atmospheric calcination/pressurized carbonation looping

Effects of Calcined Dolomite Addition on Reaction Kinetics of One-Part Sodium Carbonate-Activated Slag Cements

Effects of Calcined Dolomite on Physical Properties and Expansion Behavior of Cement

Cyclic carbonation characteristics of calcium-sorbents modified by acetic acid solution

Effect of Steam on Calcination-Carbonation Reactions of Calcium-Based CO2 Sorbent

Cyclic Calcination/carbonation Looping of Dolomite Modified with Acetic Acid for CO2 Capture

XRD study on sintering characteristics of calcined limestone under O2/CO2 atmosphere

Decomposition Kinetics and Process Experiments on Dolomite

Kinetic Analysis of the Cyclic Calcination and Carbonation of Carbide Slag for CO2 Capture

Novel Calcining Process of Low-grade Magnesite

Thermodynamic Analysis of CO_2 Absorbed in the Process of Calcium Carbonate Cyclic Calcination/Carbonation

The Effect Of Acetification On Cyclic Calcination Carbonation Co2 Capturing With Dolomite

Effect of Calcined Dolomite Addition on Sodium Carbonate-Activated Slag Cements with Different Curing Methods

Improving the carbonation resistance of alkali-activated slag mortars by calcined Mg/Al layered double hydroxides

Slag Blended Cement Paste Carbonation under Different CO2 Concentrations: Controls on Mineralogy and Morphology of Products