Abstract:The addition of basic additives in steelmaking processes is essential because these lead to slag adaptation and enable refining reactions. In calcination treatment, the process parameters temperature and dwell time influence the decomposition of dolomite as a magnesium‐containing lime substitute. It results in specific properties such as varying residual fractions of carbonates CaCO3·MgCO3 and porosity. The properties affect the dissolution kinetics, and the fast and complete dissolution is of interest. Hence, the static high‐temperature dissolution tests using dolomite‐based samples in diverse conditions (raw, modified, soft‐burnt, and hard‐burnt) are executed to determine the impact of the calcination state. The specimens are immersed in synthetic electric arc furnace slag, including 10 wt% Al2O3, 25 wt% SiO2, 25 wt% CaO, 8 wt% MnO, and 32 wt% FeO. The dolomite or dolime dissolves in the stagnant oxidic melt within the reaction time of 10 min at 1450 °C. The resulting chemistries of quenched slags, representing the current dissolution status, are examined by scanning electron microscopy using energy‐dispersive X‐ray spectroscopy analysis on metallographically prepared cross‐sections and via X‐ray fluorescence analysis of mechanically extracted slag fractions. The dissolution performance is characterized and compared for the different additive materials. The chemical and physical properties of additives affect the dissolution behavior in slag. Applying raw dolomite, the calcination happens locally in liquid slag. Soft‐ and hard‐burnt dolime and modified materials are fabricated previously by decomposition or adjustment at high temperatures. The process conditions are used to influence the fraction of remaining carbonates and the eventual sintering of the particles.

Study of Carbonizing Processes for Sintered Dolomite

Particle Carbonation Kinetics Models and Activation Methods under Mild Environment: the Case of Calcium Silicate

Effect of Calcining Process on Assimilation and Carbonation of Calcined Dolomite Slurry

Experimental study on CO2 capture performance of dolomite during atmospheric calcination/pressurized carbonation looping

XRD study on sintering characteristics of calcined limestone under O2/CO2 atmosphere

Preparation of Light-weight Magnesium Oxide and Calcium Carbonate from Dolomite by Acidification:An Experimental Study

Calcination Condition of Dolomite‐Based Materials Influencing Static Dissolution in Synthetic Electric Arc Furnace Slag

Influences of calcining-and-slaking processes on activity of dolomite

Activated Sintering of Activated Carbon-Doped Magnesia

Carbonation Characteristics in Calcium-sorbents Cyclic Calcination/Carbonation Reaction Process

Investigation on the Thermo-Dynamics of Alkali-Activated Carbonatite

Experimental Study on Preparation of Calcium Oxide by Coal Reduction of Calcium Sulfate in Carbon Dioxide Atmosphere

Study On The Reaction Process Of Alkali-Activated Carbonatite By Means Of Polarizing Microscope And Digital Holographic Microscope Technology

Thermal Decomposition Kinetics of Dolomite in Pre-prepared Pellets for Magnesium Production

Cyclic Calcination/carbonation Looping of Dolomite Modified with Acetic Acid for CO2 Capture

The Production of Magnesium Oxide from Dolomite in Guizhou

Novel Calcining Process of Low-grade Magnesite

Preparation of High-Purity Magnesia by Carbon Monoxide Reduction Pyrolysis of Magnesium Sulfate

The preparation of high purity MgO and precision separation mechanism of Mg and Ca from dolomite

Experimental Study and Modeling of Cao Carbonation: Effects of Operating Conditions on the Carbonation Behaviors of the Calcined Limestone Particles

Preparation of Active Magnesia with Magnesite