Abstract:This study presents a novel method for producing acicular aragonite using argon oxygen decarburization (AOD) slag while controlling the reaction temperature, reaction time, stirring speed, and the magnesium-to‐calcium stoichiometric ratio. This approach provides steel plants with an opportunity to decrease their CO 2 emissions and promote efficient resource utilization and CO 2 storage through the production of high-quality value-added products. The experimental results showed that reaction temperature was the most significant factor affecting the carbonation efficiency of AOD slag, followed by reaction time, stirring speed, CO 2 partial pressure, and the liquid-to-solid ratio (L/S). The study also found that elevated temperature and prolonged reaction duration favored the preferential precipitation of aragonite. Additionally, raising the temperature and the magnesium-to‐calcium stoichiometric ratio was shown to enhance the formation of aragonite, affecting its crystal growth orientation and dimensions. The optimal combination of reaction parameters for the preparation of acicular aragonite was found to be the reaction time of 8 h, the magnesium-to‐calcium stoichiometric ratio of 0.8, the reaction temperature of 120 °C, and the stirring speed of 200 r·min −1 . Under these conditions, the resulting acicular aragonite exhibited excellent overall uniformity, a large aspect ratio, and a smooth crystal surface, with a content of 91.49 %, a single crystal length ranging from 9.86 to 32.6 μm, and a diameter ranging from 0.63 to 2.15 μm. This study provides valuable insights into the efficient production of acicular aragonite from steel slag while reducing CO 2 emissions and promoting the sustainable use of resources.

Effect of cement on carbonation behaviors of argon oxygen decarburization stainless steel slag (AODS)

Sustainable Building Material from CO2 Mineralization Slag: Aggregate for Concretes and Effect of CO2 Curing

Understanding the Role of Calcium Silicate Slag in Sodium Carbonate-Activated Green Materials: Influence on Kinetics, Strength, and Efflorescence

Preparation of Coal Gasification Coarse Slag-Based Alkaline Activator and Its Activation Mechanism in Alkali-Activated Slag

Early-age carbonation mitigation of SSC by CxS minerals: Mechanism and Performances

Slurry-Phase Carbonation Reaction Characteristics of AOD Stainless Steel Slag

Enhanced carbon dioxide sequestration and Cr detoxification: Direct carbonation of AOD slag with additives under ambient conditions

Accelerated carbonation and stabilization of BOF slag: data fitting relationship between particle size and CO2 sequestration

Effects of EDTA on the accelerated carbonation behavior of steel slag used as cementitious materials

Impacts of Hydration Degree of Steel Slag on Its Subsequent CO2 Capture Behaviors and Mechanical Performances of Prepared Building Materials

Co-carbonation Behaviors of Blast Furnace Ferronickel Slag-Cement in Aqueous Conditions and the Associated Mechanisms

Effects of carbonation degree on the hydration reactivity of steel slag in cement-based materials

Effect of CO2 treatment on the microstructure and properties of steel slag supplementary cementitous materials

Slag Blended Cement Paste Carbonation under Different CO2 Concentrations: Controls on Mineralogy and Morphology of Products

Investigation of the acicular aragonite growth behavior in AOD stainless steel slag during slurry-phase carbonation

Use of CO2 to Cure Steel Slag and Gypsum-Based Material

Effect of Carbonation Treatment on the Properties of Steel Slag Aggregate

Stimulating CO2 sequestration of aluminum-rich refining slag (ARS): A proposed method of preventing katoite formation using desulfuration gypsum

Effect of MgO content on the quantitative role of hydrotalcite-like phase in a cement-slag system during carbonation

Pretreatment of alkali activation and carbonation of steel slag for using as binding material

Enhanced Carbonation Curing of Cement Pastes with Dolomite Additive